Dynacore D-HB26 Safety Adapter V-Lock 26V
Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
$139.00
Related products
-
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
0 out of 5(0)Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI)$220.00 -
Battery adapters and DC couplers
Nanlite BT-BA-V Battery adaptor V-Mount
0 out of 5(0)Attach a V-Mount battery to a light stand and power your Forza 60, Pavotube 15C, or 30C.
The Nanlite BT-BA-V can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube of Forza. The DC output is suitable for the Forza 60, Forza 60B, Pavotube 15C, and Pavotube 30C.
SKU: NAN-NNBTBAV$99.00 -
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Grip
0 out of 5(0)The optional Blackmagic Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries so you can shoot for over 2 hours on a single charge! That’s a massive battery life, in a design that integrates with the camera itself and can be used as a single unit. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots because it increases the grip area of the handle. You can also charge the batteries in the grip via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT$399.00 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24$289.00 -
Battery adapters and DC couplers
Nanlite BH-FZ60V Battery handle V-Mount
0 out of 5(0)Achieve long runtimes by powering the Forza 60 with a V-mount battery.
The Nanlite BH-FZ60V allows you to run a Forza 60 or Forza 60B from a V-Mount battery. The BH-FZ60V battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B, and a V-Mount buckle to mount the battery.
The Nanlite BH-FZ60V V-mount battery adaptor can be mounted on a light stand, and also includes a handle to enable the Forza 60 to be operated hand-held, ideal for run and gun filmmaking.
The Nanlite Forza 60 V-Mount battery handle is only compatible with 14.8V V-Mount batteries.
Forza 60 runtime from a 100Wh V-Mount battery is approximately 100 minutes.
SKU: NAN-NNBHFZ60V$35.00