Easyrig Gimbal Rig vest, Standard, waist length: 85cm (33in) to 110cm (43in)
The Gimbal Flex Vest can be mounted with; Easyrig 2,5 / Easyrig 3 Cinema / Easyrig Vario 5 support arms.
If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.
5′ long polyester seat belt webbing Cinesaddle Fasty Straps are designed to work with the Cinesaddle Stirrups or Anchors to secure your Cinesaddle to a moving or stationary platform. The Fasty Straps feature a buckle that allows you to secure the strap from loosening once you have cinched it tight.
You loop the Fasty strap around a Stirrup (not included) and put it under tension. Or when working with a Cinesaddle Anchor (not included), you can thread the end of the Anchor through the Fasty Strap’s buckle to hold it fast.
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
The Armorman 3.0 Support Vest is the main section of the support system. The mechanical arms attach to either the back of the vest for the normal configuration or over the top of the support for the overhead configuration. Release cables hang over the front of the vest to allow the operator to release the tension of the arms when they are in the locked position. Padding surrounds the vest for maximum comfort and adjustable straps allow for the vest to fit to any body type.
The Manfrotto Remote Control is the best choice if you are looking for an efficient remote control for your gimbal MVG220 and MVG460. It is the perfect accessory to take your Manfrotto gimbal to the next level, making the operation more effective and easier than ever before.
trong>With only one hand it is possible to manage the gimbal, all the remote controlled functions, the direction of the lens, the on/off switch and the operating mode, for easy and controlled shooting.
It can be adjusted and controlled within a range of 10-15m (=394-590 inches) and all the LCD display parameters can be seen and regulated (power, Bluetooth, modes ) clearly and easily.
Rosco Paint Chroma Key 5710 Blue 19L 
Nikon Nikkor Z 28-75mm F/2.8 
Tenacious FL166 Cloth Tape Fluoro Orange 24mm x 50m (511 equivalent) 
Cinekinetic Fasty Straps 
