Filmgear 9/6kW Daylight HMI Power Beam Lamphead

The original Academy Award-winning ARRIMAX remains the ultimate choice for productions requiring maximum light output. The 580 mm (22.8”) diameter, parabolic facetted reflector provides continuous focus adjustment from 15° to 50° beam angle and, since the ARRIMAX does not require a set of spread lenses, shadows are sharp and easily cut.

Safe and easy for both lamp type bases 18/12 kW, 18,000 W single ended lamps use a sturdier GX51 lamp base for which ARRI engineers have designed a special lampholder that alleviates mechanical stress from the lamp pins, now serving only as an electrical connection. The lamp clamping mechanism is self-aligning and uses a rugged, recessed lamp lock handle. To ensure that crews can easily use 12,000 W lamps or versions of 18,000 W single ended lamps with G38 bases, the new lampholder accepts either lamp type with no modification or adjustment.

The 1600W is the most powerful unit of the Joker² range. At 1600W, this Joker is comparable to over 6000W of a Quartz fixture’s output and produces one full stop more than our Joker² 800.

Three Configurations

JOKER² : without optics, the bare-bulb output is optimal for use in Lightbanks and lanterns due to its ability to create perfectly even distribution within these accessories.
JOKER² (PAR VERSION) : it features a specular reflector and a set of four PAR 64 lenses (Medium, Wide, Super Wide and Frosted Fresnel). These lenses provide various light patterns and a maximum output due to the reflector design (parabolic reflector) and finish.
JOKER² (ZOOM VERSION) : revolutionary, this lensless and focusable beamer gives 15 to 60 degrees of even light output. With its physical similarities to a faceted umbrella, the soft finish beautifully distributes light across your subject.

Convenience & Travel

With its rolling case, the Joker² 1600W is a powerful fixture easy to take along on any journey. Additionally, because It can be run on domestic electrical supply, there is no need for a generator.

A member of the ARRI M-Series, the M40 is a lens-less system that unifies the advantages of Fresnel and PAR fixtures. The unit is open face and thus very bright: around 30 % brighter than an AS40 in spot. Due to its unique, patented MAX Technology reflector, it is also focussable over a range of 18 to 52° Half Peak Angle. The M40 gives a remarkably even beam spread that casts crisp shadows over the whole focus range. The reflector characteristics is optimised for 4,000 W lamps, but can also be used with 2,500 W lamps.

The lamphead is equipped with a CCL module (Compensation of Cable Losses). When operated with the ARRI EB 2.5/4 kW High Speed AutoScan with CCL, full power is maintained all the way to the lamp even when very long cables are used. This means uniformly high light output indepent from cable length.