This Godox AD600/AD600B/SLB60W Battery Charger for WB87 charger has been made for the Godox Witstro AD600/AD600B/SLB60W, manufactured by Godox themselves, you can be certain this is the correct replacement charger for the WB87 charger (for the AD600/AD600B/SLB60W)
Godox AD600/AD600B/SLB60W Charger For WB87
Battery Charger for the WB87
100-240V AC Compatible
Replacement Battery Charger for Godox AD600
Replacement Battery Charger for Godox AD600B
Replacement Battery Charger for Godox SLB60W
$55.00
Related products
-
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Grip
0 out of 5(0)The optional Blackmagic Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries so you can shoot for over 2 hours on a single charge! That’s a massive battery life, in a design that integrates with the camera itself and can be used as a single unit. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots because it increases the grip area of the handle. You can also charge the batteries in the grip via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24




















Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output





