Built with CRMX modules from LumenRadio for filmmakers, broadcasters, and others, the TimoLink TX Wireless DMX Transmitter from Godox converts a wired DMX console to wireless by sending signals to CRMX-compatible fixtures or receivers. The TimoLink TX supports automatic frequency hopping and has a CRMX transmission range of up to 300m. The male, five-pin XLR connector rotates up to 270? for wider compatibility with different interface designs. The unit also comes with a test feature that detects whether or not a DMX signal is successfully outputted, and to simplify operational logic and enhance efficiency, the set and reset button were designed separately.
Godox Timolink TX DMX Transmitter
Built-In LumenRadio CRMX Transmitter
Up to 300m Long-Range Transmission
5-Pin Male XLR Connector Rotates 270?
Test Function Checks Connection Status
$325.00
Related products
-
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Luminous Green
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0275.001.0A -
Wireless DMX distribution
Aputure Sidus Four – 4 Universe CRMX Transmitter
0 out of 5(0)- Transmit to up to 4 Universes and 4 wired DMX universes with its bidirectional 5-pin DMX512 ports
- CRMX, Sidus, Art-Net, sACN Support
- 5.8 GHz over Wi-Fi; 2.4 GHz over CRMX
- Wireless Range: Over 790m (Wi-Fi/CRMX)
- IP65 Weather Resistant for Outdoor Use
- Four Bidirectional Wired DMX512 Ports
- Built-In Wireless Router/Ethernet Node
- Sidus via Bluetooth
- V-Mount Plate & Internal 1500mAh backup battery for uninterrupted operation for up to 80 minutes
- Sidus Four’s display screen features an intuitive user interface
SKU: APU-APR0317A31 -
Wireless DMX distribution
Spots Unlimited Gaffers Control GC28-2
0 out of 5(0)This is the version with a dual processor and a TimoTwo transmitter.
- “All-in-one” DMX console in StormCase™ casing
- 7” capacitive touch screen 800×480 pixels
- Integrated CRMX LumenRadio™ transmitter
- Integrated Lithium-ion 70 W/h battery
- 14 addressable banks/512 DMX addresses
- Integrated DMX library
- Including:
Arri, BB&S, Creamsource, Cineo, DMG, Astera, Quasar science, Carpetlight, Litegear, Kino Flo, Litepanels, Dedolight, Aladdin, Rotolight, clay paky, luxli and more….
- Including:
- Update of DMX library via USB
- Master setting via linear potentiometer
- Parameter setting via touch screen or buttons
- DMX outputs on XLR 5Pin
- Duration of operation on battery: up to 10 hours.
SKU: SPT-GC28-2 -
Wireless DMX distribution
Aputure Sidus One
0 out of 5(0)- Battery-powered single-universe DMX/CRMX transceiver with Sidus Bluetooth. Compatible with CRMX, DMX512, RDM, Art-Net via Wi-Fi, sACN via Wi-Fi, and Sidus Link Bluetooth
- Combine up to 4 Sidus One transceivers to access up to 4 universes of DMX control using Sidus Link Pro
- Wireless range: CRMX: 300m, Sidus BT: 180m, Wi-Fi: 120m
- 18 hours of battery life with USB-C charging
- IP54 dust and water resistant
SKU: APU-APR0316A31 -
Wireless DMX distribution
Exalux Connect RX-100s CRMX Receiver
0 out of 5(0)Exalux Connect RX100s is a standalone wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small Exalux PowerBank battery.
RX100s suits with any LED fixture thanks to the flexible connector on cable system.
SKU: EXL-CNT.000.005
Brother DK11247 White Label 180 (103x164mm) label per roll
Avenger A5036CS Stand Roller 36 Low Base Chrom 130/360cm 40kg Payload Weighs 13.6kg
LARH Textile Grid Full Silent White 12' X 12'
Nanlite LT-120 Lantern Softbox 120cm Bowens Mount
Zoom F6 6-Input / 14-Track Multitrack Field Recorder
Rycote Overcovers Adv, White (Pack)
Benro GoAdapter Monopod Connector Female to Female Thread
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
SmallRig NP-W235 Camera Battery 4072
Wooden Camera Universal Lens Support (19mm/15mm Studio)
Shure Digital Recording Kit – P58CN240MVI
Blackmagic Design ATEM 2 M/E Advanced Panel 40
Rycote Single Square White Mic Flag
Avenger C155 Cable Safety 4mm x 100cm 30Kg Payload
AP Stirring Rod with Thermometer
Bic Pen Economy Medium Blue Box 12
Rode XLR Cable 6m (Pink)
Okko Pro / Slim UV Protector Lens Filter 52mm
SmallRig 2060 Cold Shoe 2-Pack
Ercole H-006 Flag Arm 28mm attachment
Blackmagic Design Adapter 10G Ethernet Optical Module (Suit Teranex IP / Studio Fiber Converter only)
Blackmagic Design ATEM 4 M/E Advanced Panel 40
Rode Boompole Telescopic Microphone Boom Pole
Paterson Plastic Graduate - 1.5oz (45ml) PTP301
Brother DK22205 White Roll 62mm x 30.48 metres
Rycote Micro Windjammer -30 Uses
Lee Filters Colour Magic Saturates Pack - 10"x12" Gel Kit
Paterson Plastic Graduate - 11-oz (300 ml) PTP303
Shure A7WS Foam Windscreen for SM7, SM7A & SM7B (Black)
Pelican 1650 Case Without Foam Black
Manfrotto MVAQR-GIM-PLATE MOVE Quick release system - Gim-Pod plate
Okko Pro / Slim UV Protector Lens Filter 82mm
Benro RAMA1 Adjustable Arm Small
Shure A3WS Foam Windscreen for PG81-XLR (Black)
Rosco E-Colour Gel Sheet 246 1/4 Plus Green 1.2m x 53cm
Okko Pro / Slim UV Protector Lens Filter 40.5mm
Okko Pro / CPL Circular Polarizer Filter 52mm
Avenger D340 Kit Flextension Lens shade with Flag and Flex Arm 2 clamps and adaptors
Epson Cold Press Bright - Roll Paper 17" X 15M
Chauvet DJ D-FI XLR-TX - Wireless DMX Transmitter









