$390.00
Power your camera and other pro video equipment with the CUE-J150 V-Mount Battery from IDX System Technology. The battery can supply up to 16.8 VDC to the plate, and it can also provide up to 80W to power accessories through the integrated D-Tap output.
CUE-J-series batteries maintain the same internal pack design that isolates them for reliability and safety. There is also built-in prevention of overcharging, overdischarging, or overcurrent. IDX CUE-J150 batteries should be charged using IDX-branded chargers; third-party chargers may not charge CUE-J150 batteries correctly.
| Brand |
|---|
The REDVOLT NANO-V battery is a small lightweight power solution for the KOMODO-X, weighing in at only 0.63lbs (288g), ideal for gimbals, drones, and other setups where form factor and weight matter. The batteries dimensions (66 x 88 x 44mm) ensure a completely flat surface on the top and sides of the camera allowing for various combinations of cages and plates to be attached uninterrupted.
Featuring a 49Wh capacity with a maximum output of 6A the battery can power the KOMODO-X and DSMC3 RED Touch 7.0 inch LCD for short durations when wanting to shoot as light weight as possible.
REDVOLT NANO-V was designed in partnership with Core SWX and is compatible with most cameras/modules that accept V-Lock batteries. For issues or troubleshooting, please visit https://coreswx.supportsystem.com.
● Internal Charger Battery V-Mount.
● Lightweight, compact, high-performance Lithium-ion battery pack.
● It can be charged by itself without using an external charger. The LED indicator will light on from 1 LED to 5 LEDs during charging, and all off when fully charged.
● The five-step LED power status indicator shows accurately remaining battery capacity.
● Industry-standard Power Tap& USB output(5V, 2A) can fit on-board Camera Light and other accessories. Before using the USB output, long-press the LED check button for 3 seconds to activate it.
● Input Voltage AC90V~240V 50~60Hz, apply to the global power grid.
● Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over-current, outside circuit short and non-equilibrium an unconventional situation.
● Non-memory effect.
● Environment-friendly: No poisonous elements
● Dynacore Batteries are manufactured according to CE, ROHS standard
The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won’t be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.
With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps – you can get a maximum of 15 Amps Output.
The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity.
A 4-level indicator shows you the remaining capacity. There’s a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.
Canon EOS R1 Mirrorless Camera 
Beamz BT270 Flat Par 7x6W 4in1 DMX IRC 
Rosco E-Colour Gel Sheet 442 1/2 CT Straw (CTS) 1.2m x 53cm 
IDX Duo-C98 (96Wh Li-Ion V-Mount Battery w 2x D-Tap and USB) 
