Kaiser Fototechnik 5521 Copy and Titling Arm RT 1
Two camera mounting points with non-slip surface for landscape and portrait formats.
Mounting the camera on the inside of the camera carrier for landscape format produces images which are not upside-down. This is very convenient for comic, animation and stop-motion films.
A parallel guide makes the camera platform longitudinally adjustable, and it can be locked in any position. The entire copy and titling arm is tiltable to allow for reproduction of vertical subjects.
With interchangeable ?? / 1/8? connecting thread.
$645.00
Related products
-
Enlargers and copy stands
Kaiser Fototechnik 4478 Column, 1 m
0 out of 5(0)Wide and extremely vibration-resistant column of aluminium tubing with dull black anodized surface and cm and inch scales.
- With mount and fastening mechanism for camera arms and for lower part enlarger head 4568.
- Height adjustment by hand crank.
- Cross-sectional dimensions of the column: 70 x 35 mm (2.8 x 1.4 in.)
4407: Height adjusted by gear rack, with weight compensation by built-in roller spring, additional 1:6 fine drive. Locking screw for fixing height adjustment. Height: 80 cm (31.5 in.)
In combination together with the?Metal Plate?5504?and the camera arm 5523 also useable as a Kaiser?Vertical Stand (see image no. 2, 3, 4).
4474: Height adjusted by friction gear with plastic bearings, weight compensated by built-in roller spring, height 1 m (40 in.)?4475: Height adjusted by gear rack with weight compensation by built-in roller spring, additional 1:6 fine drive. Locking screw for fixing height adjustment. Height 1 m (40 in.)?
In combination together with the?Metal Plate?5504?and the camera arm 5523 also useable as a Kaiser?Vertical Stand (see image no. 2, 3, 4).4476: same as 4475, but without fine drive.?
4478: With 2 mounts for camera arms. Height adjusted by gear rack, upper mount with weight compensation by built-in roller spring, both mounts with locking screw for fixing height adjustment. Height: 1 m (40 in.)
4408: Height adjusted by gear rack, weight compensated by built-in roller spring, locking screw for fixing height adjustment. Height 1.2 m (47 in.)?
4409: Height adjusted by friction gear with plastic bearings, weight compensated by built-in roller spring, locking screw for fixing height adjustment. Height: 1.5 m (60 in.)
?
SKU: KFO-KF-4478 -
Enlargers and copy stands
Kaiser Fototechnik 5780 Wolfenbuttel Book Reflector 45N
0 out of 5(0)For digital reproduction of damageable historic books and documents with critical condition. Especially for books that cannot be opened for more than 45 Deg
Specifications
- Basic table (WxHxD): 88 x 75 x 78 cm (24 x 29 x 30 in)
- Max. book/page dimensions: 45 x 45 cm (17.5 x 17.5 in)
- Max. thickness of book:?20 cm (7.9 in)
- Covered area close to fold: approx. 4 mm
- Total height of book reflector: 2.07 m (7 ft)
- Total height of camera stand: 2.0 m (6.5 ft)
- Required floor space for book reflector and camera stand: max 150 x 120 cm (5 x 4 ft)
SKU: KFO-KF-5780 -
Enlargers and copy stands
Kaiser Fototechnik 4475 “microdrive” column, 1 m
0 out of 5(0)Wide and extremely vibration-resistant column of aluminium tubing with dull black anodized surface and cm and inch scales.
- With mount and fastening mechanism for camera arms and for lower part enlarger head 4568.
- Height adjustment by hand crank.
- Cross-sectional dimensions of the column: 70 x 35 mm (2.8 x 1.4 in.)
SKU: KFO-KF-4475 -
Enlargers and copy stands
Kaiser Fototechnik 4494 Inserts SYSTEM-V
0 out of 5(0)For insertion into the 4583 compound negative carrier of SYSTEM-V enlargers and for former 4483 and 4493 compound negative carrier.
- Also for the holding devices FilmCopy Vario and FilmCopy Vario Kit.
- Pair of inserts with antistatic finish.
- Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
- Without cut-out. For “do-it-yourself” cut.
SKU: KFO-KF-4494 -
Enlargers and copy stands
Kaiser Fototechnik 4421 rePRO-Adapter
0 out of 5(0)Kaiser Fototechnik 4421 rePRO-Adapter, for mounting the camera arms 5520-5527, 5539, 5540 and the enlarger head lower part (4568) on column RSP (5612) and copys stand 5710 and 5711. For use of R1 system camera arms with RSP or RSD/RD copy stands / columns.
SKU: KFO-KF-4421