Kondor Blue D-Tap to Canon LPE6 Dummy Battery Cable
The Coiled D-Tap to LP-E6 NH Dummy Battery Cable allows you to power any monitor or camera from a D-Tap power source. It regulates the 8-17V input voltage range of D-Tap sources to deliver a 7.4V output to your device via the dummy battery.
40.5cm (16″) Contracted Length. 91.5cm (36″) Extended Length. Input Voltage: 8V – 17V; Output Voltage: 8V (Regulated); Output Current: 2A.
$109.00
Related products
-
Battery adapters and DC couplers
Nanlite BT-BA-SNP/DC Battery adaptor NPF
0 out of 5(0)Attach a pair of NPF batteries to extend the runtime of your Pavotube 15C or 30C.
The Nanlite BT-BA-SNP/DC can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube or Forza. The 15V DC output is designed for the Pavotube 15C, and Pavotube 30C, Forza 60, and Forza 60B.
A pair of NPF970 batteries mounted onto this adaptor will provide 88Wh of capacity. That is nearly as much as a small (98Wh) V-Mount battery.
SKU: NAN-NNBASNPDC -
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Power System
0 out of 5(0)- Continually power your camera with USB battery packs
- Hot swap batteries mid-shooting with no downtime
- No need to purchase multiple camera batteries
- Compatible with most camera brands
- Can be adapted to work with D-Tap batteries; use D-Tap to USB Converter
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
SKU: TET-30.CRUPS110




















Rycote Baseball, Black & Windjammer Combo(19/20)
Tenba Tools Tool Box 4 Black
Rycote Replacement Lyres & Cable Clip, Super-Blimp NTG
Godox Lithium Ion Battery For AD100,V1,V860III
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output








