Kondor Blue D-Tap to SONY A7SIII Dummy Battery NP-FZ100 Cable
This D-Tap to Sony a7S III NP-FZ100 Dummy Battery Cable allows you to power the Sony a7S III series cameras from any power source with a D-Tap input. When relaxed, the cable is 40.5cm (16″) long and can be easily managed, and it stretches to 91.5cm (36″) long when you need the additional length. It supports an input voltage range of 8 to 17V, and it outputs a power-regulated 8V. The power regulator is neatly tucked away in the dummy battery, so it doesn’t interfere with the cable. We also carry a similar Sony L Series Dummy Battery.
40.5cm (16″) Contracted Length. 91.5cm (36″) Extended Length. Input Voltage: 8V – 17V; Output Voltage: 8V (Regulated); Output Current: 2A.
$119.00
Related products
-
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
-
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
