-
×
Think Tank Pixel Racing V3.0
1 × $71.00 -
×
Dynacore DN-310S Battery V-Lock USB 14.8V 310Wh
1 × $769.00
Subtotal: $840.00
V-Lock and B-Mount batteries
LumenRadio V-Mount Battery Kit
Bracket for V-Mount Batteries
10-Hour Run Time with 190Wh Battery
$221.00
The V-Mount Battery Adapter from LumenRadio attaches to the sides of of the unit using two of the chassis screws. It plugs into the DC power barrel plug using the threaded barrel connector on the rear of the unit. This allows for battery operation of the devices for several hours, depending on battery capacity. A typical battery of 190Wh gives you 10 hours of run time.
Related products
-
-
V-Lock and B-Mount batteries
Core SWX Hypercore NEO 9 Mini 98Wh AB-Mount Battery
NEO 16A Peak with 12A draw
Firmware upgradable battery packs through USB
UN38.3 Certified for air travel safe transportation
New backlit multipurpose LCD
View battery vitals through RFID reader on the battery
Intergrated Smart P-Tap
Rates for 2000 cycles with a 2 year warranty
Rubberised housing to protect against accidental drops
Storage mode built-in
Hibernation mode when not in use after 48 hoursSKU: CSX-52.NEO-9AG -
V-Lock and B-Mount batteries
Fxlion BP-7S270 Battery V-Lock 26V 270Wh
The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won’t be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.
With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps – you can get a maximum of 15 Amps Output.
The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity.
A 4-level indicator shows you the remaining capacity. There’s a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.
SKU: FXL-BP-7S270 -
V-Lock and B-Mount batteries
Fxlion BM-HV300 B-Mount Battery 28.8V 293Wh
28V B-Mount Battery
The ultra volume energy ratio design, use high power cells, rechargeable Li-ion battery, no memory effect.
With 2*D-Tap,1*USB-A and 1*USB-C multiple outputs options for equipment power supply.
Maximum 250W/10A output can power high voltage camera and high power lighting.
Build in smart PCB for over-heat, over-charge, over-discharge and over-current protections.
5-level indicators.
Build in smart communication system, can display the battery voltage / battery capacity / operating time / working current on the
camera with communication function.
More safe and compatible structure, with rubber corners can adapt to falling in the work without damaging the shell.
Use special materials for battery negative and positive can bear the temperature up to 230℃, The problem of high-temperature
damaged components caused by high current discharge is solved.
Use professional B-mount or USB-C charger to charge B-mount battery.
D-Tap,USB-A and USB-C ports with dust cap design.SKU: FXL-BM-HV300 -
V-Lock and B-Mount batteries
Fxlion Nano Three Battery V-Lock 14.8 150Wh
High power tiny sizw V-mount battery. With 15Wh up to 10 Amps working current you can get a lot of power out of this little buddy. With one D-tap output and two USB outputs, So you’re never running out of possibilities to power your equipment.
The best thing about it is the regulated USB-C output, that can charge your MacBook or any other USB-C compatible device on the go.
At the moment there are three capacities available-a 50Watthours, a 98Watthours and a 150Watthours called NANO ONE, NANO TWO and NANO THREE.A LCD shows you the remaining canpacity and voltage as well as the voltage of USB and USB-C ports. These sockets are protected from dust and moisture by a rubber lid.
There anr some dedicated accessories around, like different plates-of course in the compact design of the NANO battery.
SKU: FXL-NANOTHREE
