The Miller CX10 Sprinter II 2-Stage Alloy Tripod System with Mid-Level Spreader provides the stability of a 100mm ball fluid head and a mid-level spreader with continuously variable adjustment. The included CX10 fluid head supports up to 12kg payloads and offers 15+0 steps of counterbalance and 5+0 steps of pan and tilt drag. With counterbalance, pan, and tilt all capable of being set to zero, even the most compact and lightweight cameras can be swapped in when necessary.
Miller CX10 Sprinter II 2-Stage Alloy Tripod System with Mid-Level Spreader
CX10 100mm Fluid Head with 12kg Payload
1580 Sprinter II 2-Stage Alloy Tripod
Continuous Variable Adjustment Spreader
16mm Fixed-Length Pan Handle
Arrowx 2-Stage Soft Case
Rubber Foot Pads
15+0 Steps of Counterbalance
5+0 Steps of Pan and Tilt Drag
44 to 153cm Working Tripod Height
High-Speed Independent Dual Leg Locks
$5,428.00
Related products
-
100mm+ Systems
Miller CX14 Toggle 2 Stage Alloy Tripod System With Above Ground Spreader
0 out of 5(0)The 3770 CX14 Toggle 2-stage (alloy) tripod system combines with award winning CX14 fluid head and cost-effective yet speedy 100mm 402 Toggle tripod with above ground spreader is capable of balancing from a broadcast down to a DSLR camera, thanks to CB PlusTM technology and Miller’s precision fluid drag system.
CX14 employs CB Plus™ technology providing 16 positions of counterbalance, 5+0 settings of Miller’s fluid pan and tilt drag. Perfect for payloads to 0-14.0 kg (0 – 30.9 lbs) and with 60mm of camera plate travel, enabling you to match your camera configuration to any shot.
Matched with the 2-stage Toggle (alloy) tripod and above-ground spreader to yield a large height range 553-1723mm (22-68″), offers positive leg toggle locks and the versatility of using the system across all terrains.SKU: MIL-3770 -
100mm+ Systems
Benro A674TMM Dual Stage Tripod 100mm Bowl Twist-Lever Lock BV10 Head
0 out of 5(0)The Benro BV10 tripod kit supports up to 10kgs making it a perfect match for studio applications and larger fully rigged video cameras.
All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5-step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8″ accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminium tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras.
The tripod system extends to a maximum height of 164cm, while getting as low as 74cm. A carry case and shoulder strap are included.
SKU: BEN-BV10 -
100mm+ Systems
Miller Arrowx 5 Solo 100 3 Stage Carbon Fibre Tripod System
0 out of 5(0)The 3128 Carbon Fibre, Solo-Q 100, 3-stage Arrowx 5 system, is designed for speed of setup, high level of stability and flexibility of payloads, The 2520 spreader less three stage tripod, included in this system provides the ultimate range of heights, speed of set up and works perfectly on all terrains.
Featuring a wide payload range, precision fluid drag and Miller’s innovative 16 position CB Plus™ counterbalance system, Arrowx 5 delivers the flexibility, speed of set up and accuracy of shot, professionals expect and demand.
2-21kg (4.4-46.2lbs) payload range and 7 + 0 selectable pan-tilt fluid drag positions make Arrowx 5 ideal for ENG and EFP, enabling it to be used with a wide range of cameras, lenses and accessories and offering.
The Arrowx 5 is matched with the 3 stage Solo-Q (carbon fibre) tripod that results in range topping height range of 390-2041mm (15.3-80.38″), all terrain versatility in the lightest Arrowx system package.SKU: MIL-3128 -
100mm+ Systems
Sachtler Tripod System Video 18 FT MS 100mm
0 out of 5(0)Its predecessor has been helping people get amazing results all over the world for decades. Now, the winning formula is being improved by the Sachtler Video 18 S2 Fluid Head, which can support a payload of up to 22 kg and is a perfect fit for a wide range of video projects. This operational versatility is added to by 16-steps of counterbalance and seven steps of pan and tilt drag, which allows you to work intuitively safe in the knowledge that movement will always be smooth and seamless.
The Touch & Go quick release camera plate and sliding balance platform mean that once you’ve clicked your camera into place, the entire platform adjusts to balance your setup. The Sachtler Speedbalance technology provides lightning fast weight compensation, making the Video 18 S2 a time-saver as well as a reliable part of your gear.
For shoots where you need to balance quick setup, easy transport, support and stability, the Sachtler flowtech 100 MS Carbon Fibre Tripod is a valuable addition to your gear. The unique design gives each leg individual adjustment while releasing and locking together, meaning setting up on any surface is as easy as releasing a catch. The ergonomic design makes the tripod light and comfortable to carry, no matter where your creativity takes you.
Weighing only 4.1 kg, the Sachtler flowtech 100 MS can support a payload of up to 30 kg and extend to a maximum height of 155 cm. This versatility and flexibility are matched by high levels of stability so you can be sure that you’ll always be able to get the shot you are looking for. When you are ready to move on, the legs all lock together with a single mechanism to save you even more time and energy.
SKU: SAC-1811FTMS -
100mm+ Systems
Sachtler Tripod System aktiv10 flowtech100 MS 100mm
0 out of 5(0)Weighing only 6.9 kg (15.2 lbs.) the aktiv10 flowtech100 system is both lightweight and durable, designed to be a long-serving and high-performing part of your kit. This system is the perfect choice for professional medium-sized camcorders and digital Cine camera set ups of up to 12 kg (26.5 lbs.). 15 counterbalance steps allow for fast and precise balancing of your camera. Its sideload mechanism with a long sliding range of 120 mm make loading and positioning the camera quick and easy. Seven drag settings provide smooth and fast to adjust drag performance without jolts or vibrations. The illuminated PrismBubble with top or side view makes levelling easy from any height.
SKU: SAC-S2072S-FTMS
Tilta Follow Focus Gear for FF-T05 – 6mm 0.6m 64-tooth
Tenba Transport Case LED-60W (for ARRI S60)
3 Legged Thing QR7 Quick Release Tripod Plate - Copper
Manfrotto Lastolite Bag for Skylite Rapid H 1.0cm x L 114cm x W 35cm fits all Skylites
Okko Pro / CPL Circular Polarizer Filter 58mm
Nanlite SB-FMM60 Parabolic Soft Box for Forza FM Mount
Rycote Triangular Black Mic Flag
Nikon Nikkor Z 24-70mm F/2.8 S
Setwear Glove Leather Fingerless Large Black
Brother CZ1001 Tape Cassette 9mm x 5m White Label Roll
Benro Tortoise 35C Carbon Fibre 5 Section Photo Tripod Twist Lock
Manfrotto 244MICRO Arm Friction 15cm 244 Micro 1/4 x2 and 3/8 adaptor 4kg Payload
SmallRig Top Handle with Cold Shoe 1638C
LARH Textile Grid Half (1/2) Silent White 12' X 20'
Manfrotto MVR911ECCN Clamp-on Electronic Remote Control for Canon HDSLRs
Godox C26 Battery Charger for AD600Pro Flash
Ilford Galerie Metallic Gloss 24'' Roll (61.0cm x 30m) 260 gsm
Kupo KS-103 Versatile swiveling adapter
LARH Textile High Lite 20' X 20'
Haida M10 Adapter Ring 77mm - EOL
LARH Textile Halo Frost (Magic Cloth) 20' X 20'
Lishuai VictorSoft LED Panel Bicolour 30 x 30cm 100W
Giottos CL1002 Cleaning Kit Pro
Brother DK22211 White Roll 29mm x 15.24 metres
Shure RK143G SM58 Replacement Grille
Profoto B1 Battery Charger 4.5A
Nikon Nikkor Z 24mm F/1.8 S
Fxlion Atto One Battery Portable Multi-Voltage 7.4V 37W
Benro QR Plate for HD1 3 Way Head
Beamz AC-131 Padded Lighting Bag
Manfrotto Case Video Pro-Light Medium Int Dimension 30 x 24 x 48.5cm suits HDV like Canon C100
Ercole M13-077 Half Coupler 40-50mm parallel twin coupler
Blackmagic Design ATEM Mini Extreme
Nanlite Tube Grid with Barndoors 0.6m for Nanlite PavoTube 15C
Ilford Ilfotex Textile Adhesive (24'' x 30m)
Benro RAMA1 Adjustable Arm Small
Antari F80Z 700W Mini Fog Machine with wired remote control
Peak Design Capture Camera Clip v3, Silver - with Standard plate
Okko Pro / Slim UV Protector Lens Filter 72mm
SmallRig MagEase Magnetic CPL Filter Kit (52mm) 4216
Benro GoCoupler 2 | 90 deg
Lightstar LUXED-S LED Punch Light Bicolour 1 Module 180W
Benro Tortoise Short Centre Column #2
Benro A674TMM Dual Stage Tripod 100mm Bowl Twist-Lever Lock BV10 Head





