SmallHD Smart 7 V-Mount Battery Bracket
V-Mount Battery Bracket for Cine 7, 702 Touch, Indie 7 monitors. Installs directly to rear of monitor.
$280.00
Related products
-
Battery adapters and DC couplers
Dynacore D-TS Hot-Swap Adapter V-Lock
0 out of 5(0)Dynacore D-TS Hot Swap system.
The D-TS is a Universal Hot-Swap battery mount, it allows the user to hot-swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no downtime.
Utilising the V-Lock mounting system, it can be attached to any portable device with an existing battery bracket.SKU: DYN-D-TS -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Nanlite BT-BA-V Battery adaptor V-Mount
0 out of 5(0)Attach a V-Mount battery to a light stand and power your Forza 60, Pavotube 15C, or 30C.
The Nanlite BT-BA-V can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube of Forza. The DC output is suitable for the Forza 60, Forza 60B, Pavotube 15C, and Pavotube 30C.
SKU: NAN-NNBTBAV -
Battery adapters and DC couplers
Dynacore D-AS Gold Mount to V-Lock Adaptor
0 out of 5(0)It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.
It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
- Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
- Lock Gold Mount side of D-AS with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 124×97×40mmSKU: DYN-D-AS -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B
BlackRapid Wrist Strap Breathe
Pelican 1200 Case With Foam Black
Cotton Carrier Hub - flat 300CIK
Blackmagic Design Blackmagic URSA Gold Battery Plate






