D-tap to Sony FX6, FX9 allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper 19.5V required by the camera.Cable length: 20 inches (508mm)Specifications:Weight: 90.72 g (0.2 lbs)Dimensions: 571.5 x 34.8 x 19 mm (22.5 x 1.37 x .75 in)
Wooden Camera D-Tap to Sony FX6 / FX9
Converts battery voltage to 19.5v. Purpose built for the Sony FX9. Purpose built for the Sony FX6.
$224.00
Related products
-
Battery adapters and DC couplers
Dynacore D-TS Hot-Swap Adapter V-Lock
0 out of 5(0)Dynacore D-TS Hot Swap system.
The D-TS is a Universal Hot-Swap battery mount, it allows the user to hot-swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no downtime.
Utilising the V-Lock mounting system, it can be attached to any portable device with an existing battery bracket.SKU: DYN-D-TS$198.00 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24$289.00 -
Battery adapters and DC couplers
SmallRig NP-F Battery Adapter Plate Lite for BMPCC 4K, 6K – 3093
0 out of 5(0)1. The plate fits Sony NP-F type batteries to provide greater battery life for BMPCC 4K & 6K.
2. It provides different output ports, including a 12V DC output port and a 7.4V DC output port.
3. LED indicator for low battery warning.
4. Rubber pads on the bottom for a more stable installation.
5. Two Charging Cables – LP-E6 Dummy Battery Cable and a DC to 2 Pin LEMO Cable.SKU: SRI-3093$75.00 -
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250$44.00 -
Battery adapters and DC couplers
Dynacore D-AS Gold Mount to V-Lock Adaptor
0 out of 5(0)It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.
It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
- Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
- Lock Gold Mount side of D-AS with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 124×97×40mmSKU: DYN-D-AS$100.00