D-tap to Sony FX6, FX9 allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper 19.5V required by the camera.Cable length: 20 inches (508mm)Specifications:Weight: 90.72 g (0.2 lbs)Dimensions: 571.5 x 34.8 x 19 mm (22.5 x 1.37 x .75 in)
Wooden Camera D-Tap to Sony FX6 / FX9
Converts battery voltage to 19.5v. Purpose built for the Sony FX9. Purpose built for the Sony FX6.
$224.00
Related products
-
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B$59.00 -
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
0 out of 5(0)Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26$139.00 -
Battery adapters and DC couplers
Aputure Power Station V-Lock 2-Bay
0 out of 5(0)The Aputure 2-Bay Battery Power Station is a battery inverter that uses two industry-standard 14.4V/14.8V Gold or V Mount batteries and outputs a 48V DC current via 3-pin XLR. With this power station, users can bring the flexibility of battery power to any 48V lighting fixture, such as the Nova P300c or Amaran 100 & 200 series of LED lights.
SKU: APU-25.2BAYPWST$299.00 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24$289.00