Unified VCT Wedge Plate is a Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates. Our special reduced height ARRI dovetail shape allows each Unified camera rig to be quickly installed and balanced properly over your shoulder. Safety pin and stopper screws on the ends prevent accidental removal. Threaded M6 ARRI standard rosettes are found on each side and can be combined with our Rosette Standoffs and Rosette Arms for a quick, handheld configuration. Also present are 1/4-20 threaded holes and the ARRI standard accessory mounts (3/8-16 threaded hole with locating pins adjacent). At the rear of the wedge plate, a knob is present which can be tightened after installing onto the VCT-14 Tripod Plate to prevent any potential wiggle. A key slot is also present on the top centre for times when you might need to attach the Wedge Plate directly to the camera bottom using the included 1/4-20 and 3/8-16 low profile screws. Included: (2) 1/4-20 Low Profile Screws (2) 3/8-16 Low Profile Screws Specifications: Weight: 610g (1.3 lbs) Dimensions: 50.8 x 101.6 x 254 mm
Wooden Camera Unified VCT Wedge Plate
Works with WC Unified Baseplate Systems. Dovetail Top & Shoulder Pad Bottom. Two ARRI Rosettes for Handgrips.
$714.00
Related products
-
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
0 out of 5(0)These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W$85.00 -
Camera rig attachments, brackets and components
SmallRig 1255 SWAT NATO Clamp
0 out of 5(0)The SmallRig Swat NATO Clamp lets you secure accessories to NATO rails. The clamp design lets you slide your accessories along the length of the rail for flexible positioning. One 3/8″-16 and seven 1/4″-20 threaded holes cover the mounting surface of the clamp to secure articulating arms or direct-mountable accessories.
SKU: SRI-1255$43.00 -
Camera rig attachments, brackets and components
SmallRig 2046B NATO Clamp to Arri Rosette
0 out of 5(0)1. It is compatible with NATO rail for convenient attachment and detachment, and it could be locked tight via a locking lever.
2. It could attach NATO Rail 1409 on the cage via NATO clamp on the one end and attach Rosette Handle 1810 via the rosette on the other end for handheld shooting.
3. It could attach NATO rail on the side of cage on the one end and attach Wooden Handle 1941 for handheld shooting on the other end.
4. It could attach NATO rail on the side of cage on the one end and attach NATO Rail with ARRI Rosette 1884 and then EVF support for monitor.SKU: SRI-2046B$73.00