Matthews C-Clamp 2X Jr Rec’R 6.0”
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
$196.20
Related products
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4461-1 Clamp Eye Coupler 28mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4461-1 Clamp Eye Coupler 28mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
0 out of 5(0)Avenger C4461-1 Clamp Eye Coupler 28mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified.
SKU: AVN-C4461-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C345K-1 Clamp Barrel T-Knob TUV Silver 40-300Kg Payload 16/28mm M Gravity Casting w Safety Cable
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C345K-1 Clamp Barrel T-Knob TUV Silver 40-300Kg Payload 16/28mm M Gravity Casting w Safety Cable
0 out of 5(0)The Avenger C345K-1 Barrel Clamp in silver is made with gravity cast aluminum, has a built in 28 mm/ 1 1/8 inch junior receiver, a 16 mm/ 5/8 inch baby pin with a 1/4” threaded top and a 16 mm/5/8 inch receiver. This barrel clamp is capable of mounting pipes or tubes ranging from 42 – 52 mm/1.65 – 2.05 inch and easily locks into place using a T-Knob. The baby attachment can support loads up to 40 kg while the junior receiver can take capacities up to 300 kg/661.4 lb. The C345K-1 includes a safety cable with locking pin to secure attachments that are mounted in the junior receiver. TĂœV SĂœD certified. Recommended Accessories: C155, C155-01, C155-02 E200, FF3276, A2029, C590, C626.
SKU: AVN-C345K-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4460-1 Clamp MP Eye Coupler TUV 300Kg 42-52mm Wide 12 5mm Unthreaded Hole
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4460-1 Clamp MP Eye Coupler TUV 300Kg 42-52mm Wide 12 5mm Unthreaded Hole
0 out of 5(0)Avenger C4460-1 Clamp MP Eye Coupler TUV 300Kg 42-52mm Wide 12 5mm Unthreaded Hole.
SKU: AVN-C4460-1




















Avenger C100 Clamp Piper Jr 20 - 50mm 250Kg. 28mm Socket and Safety Cable Lock
Avenger C337 Clamp Quick Action Jr TUV Cer 40mm to 70mm Range 100Kg Payload Gravity Cast Alu
Avenger C210 Clamp Baby Pipe w/ Tommy Bar 10mm to 55mm Range 100Kg Payload Alu
Avenger C462-1 Eye Coupler LP w 16mm Spigot Range 48-52mm 500kg Payload
Ercole M13-055 Half Coupler 40-50mm with 5/8 stud
Avenger C4560-1 Clamp MP Slim Eye Coupler TUV 180kg Payload 42-52mm Wide 12 5mm Unthreaded Hole
Ercole M13-066 Half Coupler 40-50mm with eye bolt


