Tilta Seamless Focus Gear Ring for 88mm to 90mm Lens Subtotal: $5.00
Tilta
Showing 361–375 of 477 results
-
-
-
Camera rig attachments, brackets and components
Tilta Side Mounted Cold Shoe Adapter
This adapter attaches to the side of the gimbal via a NATO rail connection and provides a cold shoe mount to allow you attach various cold shoe-based accessories.
Compatible with the DJI RS2, RSC2, RS3, and RS3 Pro.SKU: TIL-TGA-SCA -
Camera rig attachments, brackets and components
Tilta Single Camera Cage for DJI Osmo Action 2 – DJI Gray – EOL
Camera rig attachments, brackets and componentsTilta Single Camera Cage for DJI Osmo Action 2 – DJI Gray – EOL
Discontinued. Limited Stock. Please call before ordering.
This single camera cage provides protective armor for the DJI Osmo Action 2 camera body and allows you more flexibility when mounting accessories or rigging the camera to various support systems.
This cage provides a ¼”-20 thread allowing you to rig your camera via mini tripod heads, noga arms, or other DJI specific support systems.
The cage features an external shutter button and is designed to not interfere with any of the wifi capabilities of the camera.
The included multi functional baseplate can be mounted onto either the bottom or side of the cage which offers maximum positioning flexibility when mounted onto DJI support systems.
We also included an external USB-C power input which allows you to significantly increase the battery life of the camera by powering it with an external source.
This new power input is also water resistant which means powering the camera externally does not limit the conditions in which you can shoot in.
This cage features a new snap on lock design that allows you to quickly attach an included top plate and allows you to expand the single cage to a double cage via an optional accessory.
This expandable module will also pass power through to another camera via the one USB-C power input.SKU: TIL-TA-T26-SCC-DG -
Lens control systems
Tilta Single-sided cinema follow focus(with safety case)
This single-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls.
It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods.
This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods such as matte boxes and lens supports.
The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit.
You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.
SKU: TIL-FF-T05 -
-
Stabilisers
Tilta Soft Shell Case for Advanced Ring Grip
This Soft Shell Case is designed to store and protect the Basic/Advanced Ring Grip, the DJI RS2 Gimbal and other relevant DJI Ecosystem accessories.
This allows you to safely transport the Ring Grip and RS2 between shooting locations and neatly store them when it is not in use.
The built in dividers allow you to easily organize your equipment, accessories and various cables.
The double sided design maximizes space and accommodates almost any size RS2 build.
The waterproof polyester design protects the case from hazards like rain and snow while preventing air pressure from building up when flying with the case.
The case also features a trolley sleeve, allowing you to easily secure the case to your luggage or pelican case handle.SKU: TIL-TGA-ARG-SSC -
Camera cages
Tilta Sony a7R V Half Cage Lightweight Kit – Black
Form-Fitted for Sony a7R V
Multiple 1/4″-20 Mounting Points
NATO Compact Top Handle Included
18mm NATO Rail Attachment Included
3/8″-16 & 1/4″-20 Mounts on Top Handle
2 Cold Shoe Receivers
Aluminuim & Steel ConstructionSKU: TIL-TA-T46-A-B -
Camera battery solutions
Tilta Sony L Series to V Mount Adapter Battery Plate Type II – Tilta Gray
This adapter allows you to adapt a Sony L Series battery plate (such as the one built into the various Z CAM cameras) to a V-mount battery plate.
This allows you to use the much greater battery life of a V-mount battery to power your camera setup, keeping battery swaps to a minimum.
This is also the perfect solution to power smaller accessories that traditionally use lower capacity L Series batteries such as smaller LED Light Panels or external monitors for focus stations.
The Type II version is designed to be more compact to put less stress on the Sony L-Series contact pins, but can interfere with some of the ports on Z CAM camera bodies.
We recommend Type I plates for users who foresee this being an issue.
SKU: TIL-TA-ABP2-G -
Camera rig attachments, brackets and components
Tilta Speed Rail Car Mounting Kit
Arm your vehicle with the Speed Rail Car Mounting Kit designed for the Hydra Predator and other car mounted shock absorbing arms!
This kit allows you to build custom speed rail rigs to support various shock absorbing arms in multiple configurations.
The kit is built around 6 pieces of speed rail, of two different sizes, that can be used on their own or interconnected to create longer pieces for specific rigging needs.
The 4 adjustable mounting clamps allow you to connect the speed rail in almost any configuration.
The kit includes 4 high capacity suction cups, each individually rated for 50 kg or around 110lbs.
These suction cups connect to the speed rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily.
Utilizing 4 suction cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment.
The included Front Tow Hook Adapter allows you to connect the system to any vehicle that already has that mounting point. which helps create a secure connection that relies on more than just suction.
Dimensions: (Outer Diameter x Inner Diameter x Length)
Long Speed Rail – 50 x 46 x 730mm
Short Speed Rail – 50 x 46 x 355mmSKU: TIL-HDA-SRK -
Camera rig attachments, brackets and components
Tilta Speed Rail Mounting Clamp Set
These 4 adjustable Mounting Clamps allow you to connect the 50mm Speed Rail in almost any configuration.
This kit functions as a replacement for the Mounting Clamps included in the Speed Rail Car Mounting Kit.
This can also be used with the original kit to build larger rigs via additional Speed Rail and Suction Cups (not included).
SKU: TIL-HDA-SRK-MC -
Pump Cups
Tilta Speed Rail Mounting Suction Cup
This high capacity Suction Cup is individually rated for 50 kg or around 110lbs.
These Suction Cups connect to 50mm speed rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily.
Utilizing multiple Suction Cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment.
This Suction Cup functions as a replacement for the ones included in the Speed Rail Car Mounting Kit and can also be used in addition to the original kit to build larger or more secure rigs.
SKU: TIL-HDA-SRK-SC -
Pump Cups
Tilta Speed Rail Mounting Suction Cup Kit
These 4 high capacity Suction Cups are individually rated for 50 kg or around 110lbs.
These Suction Cups connect to 50mm Speed Rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily.
Utilizing multiple Suction Cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment.
These Suction Cups function as replacements for the ones included in the Speed Rail Car Mounting Kit and can also be used in addition to the original kit to build larger or more secure rigs.
SKU: TIL-HDA-SRK-SCK
