-
×
Rode NTH-CABLE24 Orange (2.4m Headphone Cable in Orange)
1 × $39.00 -
×
Tilta Armor man 3.0 Support Cup(pair)
1 × $309.00
Subtotal: $348.00
Tilta
Showing 76–90 of 552 results
-
Stabilisers
Tilta Armor man 3.0 Arm (R)
This shock-absorbing stabilized right arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-R -
Stabilisers
Tilta Armor man 3.0 Nucleus-M Handle Support Cup(Pair)
The Armor Man 3.0 Nucleus-M Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when using the Nucleus-M’s hand grips with your gimbal system. When you want to attach the Armor Man to the gimbal, simply fit the gimbal-mounted Nucleus-M hand grips into the support cups and then re-grab the hand grips like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the hand grips.
SKU: TIL-ARM-T03-NMSC -
-
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Cable Pulley
This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
SKU: TIL-ARM-T03-OCP -
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
SKU: TIL-ARM-T03-ORAC -
Stabilisers
Tilta Armor man 3.0 Support Cup(pair)
If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.
SKU: TIL-ARM-T03-SC -
Stabilisers
Tilta Armor man 3.0 Support Vest
The Armorman 3.0 Support Vest is the main section of the support system. The mechanical arms attach to either the back of the vest for the normal configuration or over the top of the support for the overhead configuration. Release cables hang over the front of the vest to allow the operator to release the tension of the arms when they are in the locked position. Padding surrounds the vest for maximum comfort and adjustable straps allow for the vest to fit to any body type.
SKU: TIL-ARM-T03-SV -
Stabilisers
Tilta Armor man 3.0 Universal Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Universal Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the normal operating mode. The clamps attach to each side of the gimbal ring and then after the adapters are attached to each of the Armor Man’s arms, the operator can simply connect the arms to the clamps on the gimbal to start operating. When you want to detach the gimbal, push in the adapters’ quick release buttons to slide off of the clamps.
SKU: TIL-ARM-T03-URAC -
Stabilisers
Tilta Armor man 3.0 Universal Gimbal Ring Adapter(Pair)
If you have a ring-based gimbal, the Universal Gimbal Ring Adapters allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms. These dovetail-based adapters slide onto each of the Armor Man’s arms and then attach to the Universal Gimbal Ring Adapter Clamps to provide support for your gimbals. When you want to attach the Armor Man to the gimbal, simply connect the arms to the preset clamps on the gimbal to start operating and when you want to detach the gimbal, push in the adapters’ quick release buttons to slide off of the clamps.
Color: Black
Materials: Aluminum-alloy, stainless steelSKU: TIL-ARM-T03-GRA -
Stabilisers
Tilta Armor man 3.0 Waist Support
This waist support attaches to the Armorman 3.0 vest as the main support for the vest which positions the weight of the Armorman 3.0 and gimbal/camera setup onto the operator’s midsection. Padding surrounds the waist support for maximum comfort and an adjustable strap allows for the support to fit to any body type.
SKU: TIL-ARM-T03-WS -
Stabilisers
Tilta Armor man 3.0 Waterproof Safety Case
Protect and store your Armor Man 3.0 with this travel-sized waterproof rolling safety case. Custom foam cutouts tightly pack your vest and two shock-absorbing stabilized arms into the case for maximum protection and portability.
SKU: TIL-ARM-T03-WSC -
Setwear and belts
Tilta Baseball Cap – Black
Made with high-quality materials, the Tilta Baseball Cap is designed to last.
This cap is the perfect accessory for any casual or outdoor event whether you’re operating a camera or just spending sometime outside.
The cap features a classic baseball inspired design with a curved visor and an adjustable strap at the back, ensuring a comfortable and secure fit for all head sizes.
The Tilta Baseball Cap is made from a lightweight and breathable fabric, making it perfect for hot and sunny days.
The cap’s black color makes it versatile and easy to match with any outfit, while the subtle Tilta logo on the front adds a touch of style.
Whether you’re on set, going for a hike, or just enjoying a day out, the Tilta Baseball Cap is a must-have accessory for anyone who wants to stay cool and protected while looking great!
SKU: TIL-TA-BC-B
