Lens control systems

Coming soon!

• 4-Channel Focus, Iris, Zoom & ND Control
• 2.4″ Touchscreen, Electronic Focus Ring
• Reliable & Fast 0.02-Second Response
• Handwheel, Right & Left Handgrips
• Two Lens Drive Motors, 15 & 19mm Mounts
• Use Handwheel on Right or Left Side
• Dedicated Interference-Resistant Channel
• Two 0.8 MOD & One 0.5 MOD Drive Gears
• 128 Lens Data Presets with Hand Unit
• MARK Point & RANG Memory Protection

Handwheel with Focus, Iris & ND Control
2.4″ Touchscreen, Electronic Focus Ring
Reliable & Fast 0.02-Second Response
Lens Drive Motor, 15 & 19mm Mounts
Use Handwheel on Right or Left Side
Dedicated Interference-Resistant Channel
0.8 MOD Drive Gear
128 Lens Data Presets with Hand Unit
MARK Point & RANG Memory Protection

It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet.
The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time.
Simply set the motors and hand unit/hand grips to the same channel and you will have full control.
The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity.
The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup.
Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5N·m
To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.
The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V.
The hand unit and hand grips are each powered with two 18650 rechargeable batteries (batteries NOT included). When fully charged, the batteries in the hand grips last up to 2 days, while in the hand unit they last up to 10 hours.
Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor. This then gives you R/S capabilities through the hand unit and/or the handles.
** PLEASE NOTE: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-M since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M.
Only use cables that have been developed by us exclusively for the Nucleus-M system. 
Weight:
Motor Dimensions:
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood
Color: Tilta Gray
Recommended Battery Link: https://tilta.com/support/which-batteries-do-you-recommend-for-the-g2-g2x/
Tiltamax Nucleus-M Firmware Update 18.12.19 – December 2018

This Micro USB to USB-C cable for the Nucleus-Nano allows you to power the motor from a USB-C power output port.

This makes this cable the perfect solution for powering the motor from the DJI RS2.

This cable can also be used to power and control the Nano motor via our Advanced Side Handles.

Please Note: this cable cannot power the Nano motor from a camera body

Discontinued. Limited Stock. Please call before ordering.

0.8 MOD Gear for Cine Follow Focuses
46.5 to 48.5mm Diameter for Focus/Zoom
Fully Closed and Requires No Screws
Even Pressure, No Drifting, Accurate

Discontinued. Limited Stock.

0.8 MOD Gear for Cine Follow Focuses
49.5 to 51.5mm Diameter for Focus/Zoom
Fully Closed and Requires No Screws
Even Pressure, No Drifting, Accurate

Gear ring sizes cover all lens models. Unique materials guarantee flexibility and durability. Accurate focus and no skipping. Silent action and smooth operation.
Protects your lens. Reduces lens gear abrasion. 360 degree seamless rotation. No resistance. Smooth focusing rotation.
With metallic and plastic follow focus gears. Flexible yet rugged. Scratch resistant.
Easy to cut design, multi-purpose, flexible application, fits different lens focus gear widths.
Fully closed gear ring. Evenly distributed pressure. Durable & firm attachment with no drifting. Prevents lens damage
Every focus gear ring is engraved with mod number and matching lens diameter.
This seamless gear ring allows you to add a 0.8m toothed ring to photographic lenses to allow for the use of cinema follow focuses. Find compatible rings in our support section.

0.8 MOD Gear for Cine Follow Focuses
62.5 to 64.5mm Diameter for Focus/Zoom
Fully Closed and Requires No Screws
Even Pressure, No Drifting, Accurate