Avenger C338 Clamp Quick Action baby clamp 20mm to 52mm Range 50Kg Payload
The Avenger C338 Quick Action Baby Clamp with 16 mm/5/8 inch spigot or pin is ideal for all types of lights or fixtures with a baby receiver. This slim, lightweight baby clamp designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the T-Handle can easily hold lights up to 50 kg/110.2 lb. The jaws of this quick action baby clamp can grip pipe diameters ranging from 20 to 52 mm/0.78 to 2.04 inch. Along with the attached safety cable with carabiner for the clamp there is a dedicated slot to use an additional safety cable if needed. Recommended Accessories: C155, C155-01, C155-02, FF3276, E390, C1575B.
$232.01
Related products
-
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4560-1 Clamp MP Slim Eye Coupler TUV 180kg Payload 42-52mm Wide 12 5mm Unthreaded Hole
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4560-1 Clamp MP Slim Eye Coupler TUV 180kg Payload 42-52mm Wide 12 5mm Unthreaded Hole
0 out of 5(0)The Avenger C4560-1 MP Slim Eye Coupler grid clamp is a base model eye coupler designed for user customization. This slim version MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The lower jaw has a special flattened shape which helps in the sizing of this clamp and the increased flexibility to clamp down on different types of tubing. It offers the user complete customization and flexibility for any application where a grid clamp is needed. The MP Slim Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 42 mm(1.65”) to 52 mm(2.04”) and is 30 mm(1.18”) wide. The attachment hole is 12.5 mm(.5”) and is located on the base of the clamp. Capable of holding up to 180 kg loads this clamp will perform in many demanding environments. TÜV and SÜD certified. Recommended Accessories: E390, C155, C460-1, C461-1, C463-1, C4460-1, C464-1, E200, C4465-1, C464-1.
SKU: AVN-C4560-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C4462-1 Clamp Eye Coupler 16mm Spigot 300kg Payload 42-52mm Wide TUV SUD Certified
0 out of 5(0)The Avenger C4462-1 MP Eye Coupler grid clamp comes supplied with a 16 mm(5/8”) baby male spigot. Commonly referred to as a Little Ben Clamp this popular clamp is ideal for many rigging systems, truss and entertainment configurations. This popular MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The lower jaw has a special flattened shape which helps in the sizing of this clamp and the increased flexibility to clamp down on different types of tubing. Capable of holding up to 300 kg loads this clamp will perform in many demanding environments. The MP Eye Coupler uses a wing nut with washer locking design and is able to clamp down on round tubes, truss or grids ranging from 42 mm(1.65”) to 52 mm(2.04”) and is 50 mm(1.96”) wide. TÜV and SÜD certified. Recommended Accessories: C155, C155-01, E390, C460-1, C463-1, C4460-1, C464-1, E200, C4465-1.
SKU: AVN-C4462-1 -
Clamps Half Coupler, Barrel, Grab, C-Clamp and Piper
Avenger C337 Clamp Quick Action Jr TUV Cer 40mm to 70mm Range 100Kg Payload Gravity Cast Alu
Clamps Half Coupler, Barrel, Grab, C-Clamp and PiperAvenger C337 Clamp Quick Action Jr TUV Cer 40mm to 70mm Range 100Kg Payload Gravity Cast Alu
0 out of 5(0)The Avenger C337 Quick Action Junior Clamp with 28 mm/1 1/8 inch receiver is the perfect partner for hanging lights with a 28 mm/1 1/8 inch Junior spigot or pins. Designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the rubber covered T-Handle this clamp easily can hold lights up to 100 kg/220 lb. Made in gravity cast aluminum, this clamp is ideal to hang all types of lights and luminaires in TV studios and theatres. Its incredible coupling range means it can clamp onto most industry standard pipe diameters (Pipes ranging from 40-70mm/1.57 to 2.75 inch). To meet all safety requirements, the Avenger C337 has been designed with a dedicated slot for flexible steel safety cables, has a built in safety pin to secure the load or adapters mounted into this clamp. T-Top rubber T-Handle cover included to improve grip. TÜV SÜD certified. Recommended Accessories: E200, C155, FF3276, D400, C626, A2014, A2029, A2029CB, C590, C4461-1.
SKU: AVN-c337
Manfrotto 203 Arm Extension Mini 12cmfits into mini clamp 171
Manfrotto MVGBF-CFAC Gimboom accessory connector
Cinekinetic Fasty Straps
Avenger E250 Pin Baby Double 5/8in Long 15.24cm
Atomos Ninja
PortKeys OEYE-RED EVF
Tilta Follow Focus Gear for FF-T05 – 6mm 0.6m 64-tooth
Manfrotto FF3208 Connectors Aligning for Sky Track
Avenger A5017 Stand Roller 17 Folding Base 98/170cm 12kg Payload Weighs 5.5kg
Avenger E200 Adaptor for Stand 1 1/8 to 5/8 or 28mm to 16mm attach lights and accessories
Manfrotto 297BBASE Base Braked Large Black 100cm footprint 40kg Payload 28mm socket 16mm stud 3/8'' M
Avenger C481 Clamp LP Eye Coupler Fixed 90 300kg Payload 42-52mm Wide Fixed at 90 degree






