The DJI 150cm Extension Rod Kit for Osmo Action 3 adds an adjustable extension rod to your Osmo Action, Action 2, and Action 3 camera for selfies or low or high-angle shots. The camera mounts onto the extension arm using the included vertical quick release mount, and it locks using the included screw. The rod can extend from 30cm to 1.5m in length, offering enough distance to capture wide angles. There is a 1/4″-20 thread on the bottom of the vertical mount that allows you to add accessories or mount it onto another rig.
DJI 150cm Extension Rod Kit for Osmo Action 3
For Selfies & Low/High-Angle Shots
Rod Extends from 30cm to 1.5m Long
Includes Vertical Mount & Locking Screw
1/4″-20 Accessory Thread on Bottom
$65.00
Related products
-
Stabilisers
Cinekinetic Mini Saddle
0 out of 5(0)The CineKinetic Marsupial Mini Saddle is a unique camera support that holds the camera rock steady. Using high tech foam balls, the CineSaddle absorbs vibrations and provides a very stable surface for the camera. It is lightweight and easy to set up.
The CineKinetic Marsupial Mini Saddle can be used in many ways including on a flat surface or on top of a tripod. With the mounting kit, you can equip the support onto any moving object, creating a dolly.
SKU: CKN-MARSUPIALMS -
Stabilisers
Manfrotto MVGFF Follow Focus for Manfrotto Gimbals 220&460
0 out of 5(0)Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :1- Fix the lens gear to the camera’s focus ring position
2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.
3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.
4- Insert the data cable into the USB port of the fixed plate and the installation is complete.
SKU: MAN-MVGFF -
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Cable Pulley
0 out of 5(0)This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
SKU: TIL-ARM-T03-OCP -
Stabilisers
Tilta Armor man 3.0 Arm (L)
0 out of 5(0)This shock-absorbing stabilized left arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-L -
Stabilisers
Manfrotto MVGBF-CFAC Gimboom accessory connector
0 out of 5(0)Gimboom accessory connector is specifically designed for the revolutionary Gimboom, the fast boom by Manfrotto, allowing the addition of external accessories such as monitors or audio equipment to Gimboom.
It allows users to keep their focus on framing even when the Gimboom is fully extended and the camera display is too far away for the user to see the display. It offers a safe, solid and effortless attachment for any 3/8” threaded accessory, with an anti-rotation geometry to make it perfect for the 244 microarm.
Thanks to the dedicated knob, the one-hand attachment is easy to use even when the gimbal is mounted.
SKU: MAN-MVGBF-CFAC
Manfrotto 649 Clamp Table
Encore Road Case 19" Rack Mount 24RU with Castors Black
Ercole W037 Cardellini End Jaw 40cm
Profoto Deep Small Umbrella (33", White)
Manfrotto 083NWB Stand Wind up Black Chrome 139-247cm 45kg payload
Nanlite Header Cable 5m for Forza
Profoto Deep Medium Umbrella (41", White)
Atomos Full to Mini HDMI Coiled Cable (11.8 to 17.7") ATOMCAB008
Superior Background Paper Seamless 04 Neutral Grey 1.35m x 11m
Atomos AtomFLEX HDMI (Type-A) Male to Mini-HDMI (Type-C) Male Coiled Cable (30 to 60cm) ATOM4K60C3
Avenger C500 Grip Gaffer Pelican style 10Kg Payload 15-80mm Wide 16 & 17mm Studs
SmallRig 1798 Tripod Mounting Kit W/15mm Rail Block
SmallHD Thin Mini HDMI to HDMI cable 45cm
TecArt Dimmer Single Channel Hand Squeezer
Encore Road Case 19" Rack Mount 12RU with Castors Black
Nikon PC-E Nikkor 45mm F/2.8d
Manfrotto MVGEXT Extension in carbon fibre for Manfrotto Gimbals








