Sizes: Small & Standard
Weight: Vest: 2,1 kg (4.6 lbs)
Height: 55 cm (22 in)
Small waist hip length: 66 – 80 cm (26-31 in)
Std. waist hip length: 75 – 90 cm (30-36 in)
$2,840.00
Based on the Gimbal vest. Like the Easyrig Cinema Flex Vest the Gimbal Flex vest features an upper part over the chest is reinforced for better fitness for a lady camera operator.
The upper part is adjustable with velcro over the shoulder. Under your arm there is a 40 mm band that is adjustable for a perfect fit.
The Gimbal Flex Vest can be mounted with; Easyrig 2,5 / Easyrig 3 Cinema / Easyrig Vario 5 support arms.
Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :
1- Fix the lens gear to the camera’s focus ring position
2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.
3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.
4- Insert the data cable into the USB port of the fixed plate and the installation is complete.
The CineKinetic Marsupial Mini Saddle is a unique camera support that holds the camera rock steady. Using high tech foam balls, the CineSaddle absorbs vibrations and provides a very stable surface for the camera. It is lightweight and easy to set up.
The CineKinetic Marsupial Mini Saddle can be used in many ways including on a flat surface or on top of a tripod. With the mounting kit, you can equip the support onto any moving object, creating a dolly.
The Armor Man 3.0 Nucleus-M Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when using the Nucleus-M’s hand grips with your gimbal system. When you want to attach the Armor Man to the gimbal, simply fit the gimbal-mounted Nucleus-M hand grips into the support cups and then re-grab the hand grips like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the hand grips.
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
Gimboom accessory connector is specifically designed for the revolutionary Gimboom, the fast boom by Manfrotto, allowing the addition of external accessories such as monitors or audio equipment to Gimboom.
It allows users to keep their focus on framing even when the Gimboom is fully extended and the camera display is too far away for the user to see the display. It offers a safe, solid and effortless attachment for any 3/8” threaded accessory, with an anti-rotation geometry to make it perfect for the 244 microarm.
Thanks to the dedicated knob, the one-hand attachment is easy to use even when the gimbal is mounted.
Benro GoCoupler 2 | 0 deg 1/4" & 3/8" Mount 
Nanlite FL-20G Fresnel Attachment with barndoors Bowens Mount 
Teradek Bolt 6 XT 750 12G TX/RX Deluxe Set V Mount 
Manfrotto MVGBF-CFAC Gimboom accessory connector 
