Easyrig Vario 5 with Cinema Vest and Stabil G3 Stabiliser

If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.

If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.

Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :

1- Fix the lens gear to the camera’s focus ring position

2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.

3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.

4- Insert the data cable into the USB port of the fixed plate and the installation is complete.