The Tilta Power Supply System for DSLR and Mirrorless Cameras enables you to use a longer-lasting V-mount battery with your DSLR, mirrorless camera or compatible accessory. A Canon LP-E6 dummy battery integrated D-Tap port, plus 5, 8, and 12V cables are included to power your camera or device. The rod adapter enables you to fasten the system to a pair of 15mm LWS rods.
Tilta DSLR power supply system(15mm rod adaptor) V lock
DC Connection to Camera or Accessory
1 x Canon LP-E6 Dummy Battery
Mounts V-Mount Battery onto 15mm Rods
1 x 14.8V D-Tap Output Port
$295.00
Related products
-
Battery adapters and DC couplers
Dynacore D-MS-PG Mount Tiny V-Lock for camera rail
0 out of 5(0)Dynacore Tiny V-Lock battery mount for a Camera rig standard rail system.
Use this to build your power solution on your rig.
Offering Two D-tap outputs
Weight: 0.25Kg
Size: 99.5*107*54.5mmSKU: DYN-D-MS-PG -
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
0 out of 5(0)Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26 -
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24