10/100M Ethernet port
Programming via web-interface
4 x DMX512-A (ANSI E1.11) port (Opto-isolated, bi-directional)
RDM (ANSI E1.20)
MIDI IN + OUT (inc. MTC, MSC, MMC)
SMPTE timecode
4x GPI port (contact-closure or 0-10V)
Real-Time Clock with battery
Art-Net, sACN, KiNet
HTTP, TCP, UDP & OSC
Protocol for synchronising multiple cores.
9-24V DC 500mA (PSU included)
Power over Ethernet (class III)
Desktop, DIN Rail or 19 rack mounted (optional adapter)
Operating temperature -20C to +50C (-4F to 122F)
Compatible with Kiosc software
Bundled with CueluxPro and vManager software
Compliance: CE, ROHS, UKCA, FCC, UL62368-1, CSA C22.2 62368-1:19
$3,580.00
The CueCore3 is a 2,048 DMX channels lighting controller for permanent installations. The device is completely solid-state; it is a secure and low-maintenance installation control solution.
The onboard flash memory allows for storing DMX shows. Playback can be fully automated and triggered by various IP based protocols, GPI, MIDI or internal scheduler. Programming is done through its dynamic web interface.The CueCore includes a 4-universe licence of the CueluxPro Lighting control software.
The CueCore3 supports RDM discovery, setting fixture parameters and reading RDM status messages.
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX stream as soon as the main input is disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The units are available with a choice of 3 or 5 pin connectors.
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX streams as soon as the main inputs are disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The unit is available with up to 4 main DMX streams and 4 backup DMX streams. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.
SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.
Avenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female 
Chauvet DJ DataStream8 8-Channel DMX Splitter 
Antari BCT1 Timer remote control for B100X B200T 
Chauvet DJ DMX-RT4 DMX Recorder 
