Search results: “Nanlite” – Page 3
Showing 31–45 of 194 results
-
Power supplies and AC adapters
Nanlite E27 Magnetic Base Adapter for Pavobulb
Easily attach a Nanlite PavoBulb 10C to metal surfaces.
Features a female E27 socket for attaching your PavoBulb, and a magnetic base for mounting.
SUPPLIES AC POWER TO PAVOBULB
In addition to being a magnetic mount, it also acts as an AC power supply for the Nanlite PavoBulb 10C. A figure 8 power cable is optional and can be plug into the base to turn it to a complete lamp.
OPTIONAL BATTERY ADAPTER AVAILABLE
If you want to mount a PavoBulb to a metal surface while running the light on battery power, this accessory can be connected to the separately available Nanlite NP-F Battery Adapter and Mount for PavoBulb 10C.
SKU: NAN-NNASMBAE27 -
On light modifiers
Nanlite Nanlux FL-35-PO Fresnel with Pole-Operated Yoke to fit Evoke 1200 LED Spot Light 5600K
On light modifiersNanlite Nanlux FL-35-PO Fresnel with Pole-Operated Yoke to fit Evoke 1200 LED Spot Light 5600K
Ideal for ceiling-mounted Evoke 1200.
The Nanlux FL-35-PO is a special pole-operated version of the FL-35. Using the quick-release mechanism it is quick and easy to swap the yoke between the Evoke 1200 fixture and the FL35 Fresnel without any tools.The innovative mount design utilises the yoke from the Evoke 1200 to reposition the centre of gravity.
Uses a specific NL mount to fit the Nanlite Evoke. Supplied with barn doors.
350mm diameter
Pole Operated
Custom designed for the Evoke 1200/1200B, including 3 drive knobs for focusing and pan/tilt adjustment. When connected with a separately purchased pole, adjustments can be made on the ground when the lights are rigged up high.WEIGHT: 16.14kg
FL-35-PO Includes:
1 x FL-35 Fresnel Lens with Pole-Operated Yoke
1 x Barndoor
1 x User ManualSKU: NAN-NLFL35PO -
On light modifiers
Nanlite Nanlux NL Mount Projection Adapter AS-PJA-NLM to fit Evoke 900C/1200/1200B LED Spot Light 5600K
On light modifiersNanlite Nanlux NL Mount Projection Adapter AS-PJA-NLM to fit Evoke 900C/1200/1200B LED Spot Light 5600K
High Efficacy, Quality Optics Optimized optical system that can avoid light loss and increase luminous efficacy. Aspheric lens with optical coating can efficiently improve light transmittance, accuracy in CCT value as well as homogeneity in the beam.
High Load Capacity, High Degree Stability Made of high strength aluminum alloy and can be easily clipped into place by rotating, while an extra locking screw provides enhanced stability. Support the weight of third-party projector mount with much ease. Sturdy combination even when pointed at large angle of depression. It also comes with a ring for attaching a safety wire.
SKU: NAN-NLASPJANLM -
LED panels
Nanlite Nanlux TK-450 5600K 455W LED Soft panel
This Nanlux TK-450 5600K 455W LED Soft panel measures 35 x 21.3 x 3.4″, has a wide beam spread, and is dimmable from is 0 to 100%. It has a solid 5600K colour temperature and a high CRI/TLCI rating of 96/98 to indicate advanced accuracy in colour reproduction. There are several convenient control options including wired DMX, wireless Bluetooth, wireless Lumenradio DMX, and CRMX. The light has 11 built-in Special FX including INT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candle/Fire, Bad Bulb, Fireworks, Explosion, and Welding. The TK-480 is ready for worldwide use thanks to its 100 to 240V power supply, but will also run on optional V-mount batteries in situations where AC power is unavailable.
SKU: NAN-NLTK450 -
LED panels
Nanlite Nanlux TK-200 5600K 240W LED Soft panel
This Nanlux TK-200 5600K 240W LED Soft panel is 0 to 100% dimmable, measures 35 x 21.3 x 3.4″, and has a wide beam spread. The panel also has a solid 5600K colour temperature with a high CRI/TLCI rating of 96/98 to indicate superior accuracy in the rendering of colour. The panel has numerous control options including wired DMX, wireless Bluetooth, Lumenradio, and CRMX. The light’s 11 built-in Special FX include INT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candle/Fire, Bad Bulb, Fireworks, Explosion, and Welding. The light is ready for worldwide use thanks to its 100 to 240V power supply, but will also run on V-Mount batteries in situations where AC power is unavailable.
SKU: NAN-NLTK200 -
LED panels
Nanlite Nanlux TK-140B Colour Variable 160W LED panel
The Nanlux TK140B softlight LED panel provides bright, uniform light in a slim form factor. The included yoke provides balanced mounting on a light stand, while the optional goose-neck swivel stand mount allows the panel to be adjusted to provide horizontal or vertical lighting. Colour variable from 2700K to 7500K, fully dimmable and flicker-free, the Nanlux TK-140B panel is DMX, lumensradio, and WiFi-enabled, allowing you to control power, colour, and special effects easily.
This is a great value light and built strong to travel to on-location shoots. All metal construction with four barn doors for control of spill, and protection during transport.
SKU: NAN-NLTK140B -
On light modifiers
Nanlite Nanlux FL35-YK Fresnel to fit Evoke 900C 1200 and 1200B LED Spot Light
The specially designed Nanlux FL-35YK fresnel with NL Mount, is compatible with the Evoke 900C and Evoke 1200 series. With a new center-mounted yoke offers a more balanced orientation plus a non-rosette locking hinge allowing for a smooth tilt movement.
Illuminance level boosted to 49940lux@3m 5600K when attached with the Fresnel focusable from 11°-45°, providing an excellent Hollywood level hard light solution.
*Evoke LED light sold separately
SKU: NAN-NLFL35YK -
LED panels
Nanlite Lumipad 25 soft LED panel twin kit with hard case, light stands and grids
A portable battery powered 2 point soft LED light kit in hard case. 2 LED Panels, AC Adaptors, Light Stands, Grids and Hard Case.
An ideal kit for on-location Interviews, product demonstration videos, and youtube vlogging.
The Nanlite Lumipad 2KIT sidelit LED panel kit provides soft light not possible with directional LED panels. The softness provides a flattering light wrap for close up video footage such as interviews. The softness of the light also makes it easier for the talent to look toward the light source without squinting. The light softness is achieved by angling the LEDs from the side of the panel and then diffracting the light through the front diffusion panel. LEDs.
The superior quality of the extra-large luminous chips gives higher brightness with the same energy consumption. It improves conversion efficiency, reduces power consumption, and increases battery life. Each LED panel includes a dimmer to adjust light output and is colour adjustable between 5600K and 3200K. At just 1kg per light panel, this is a very portable, very lightweight off-camera lighting kit.
SKU: NAN-NNLUMI252KBS -
Brand-specific cables and connectors
Nanlite CB-DMX-3.5C-1/2 DMX Cable for Forza 150 and Forza 60C
The Nanlite CB-DMX-3.5C-1/2 cable is designed to control the Forza 150 and Forza 60C via DMX.
The cable adapts 3.5mm plug to standard 5-pin dual XLR connectors(both male and female) to permit connection of fixtures to DMX console. A unique design of dual adapted connectors allows for controlling multiple fixtures in series connection to bring about more stable performance out of fixtures in DMX connection.
SKU: NAN-NNCBDMX35C12 -
On light modifiers
Nanlite 150cm Easy Up Quick-fold Parabolic Softbox for Forza 200, 300/300B, 500 and 720/720B
On light modifiersNanlite 150cm Easy Up Quick-fold Parabolic Softbox for Forza 200, 300/300B, 500 and 720/720B
The 150cm Easy Up parabolic softbox makes it faster to set up and pack up, thanks to the quick fold umbrella mechanism inside.
The softbox offers a quality diffused light that will enhance videos, and photos. The 150cm Easy Up features an outer diffusion material and an optional grid to control light spill and give more direction. This Quick fold softbox uses industry-standard Bowens mount to connect to the Forza 200, 300/300B, 500 and 720/720B.
Note: Some smaller Nanlite models, including the Forza 60 and Forza 150 series LED lights uses a specific FMM micro mount. The FMM to bowens mount adaptor will be required to mount this modifier onto any models using the FFM Forza Micro Mount.
SKU: NAN-NNSBPR150Q -
LED continuous monolights and fresnels
Nanlite FS-60B bi-colour LED monolight
The FS-60B bi-colour LED monolight from Nanlite. Illuminate your livestreams, video recordings, and photo sessions with this 9.7 x 5.2 x 3.4″ fixture that weighs only 850grams. This compact, powerful, and versatile lighting solution has a 45° reflector to offer a 6228 lumen output. It emits up to 13,360 lux @1m of 5600K daylight-balanced light. In addition, it has a CCT range of 2700-6500K with a high CRI/TLCI of 96/97, ensuring advanced and accurate color rendition. Its bi-color design provides warmer tungsten and cooler daylight tones, while maintaining pleasing skin tones. The FS-60B has 12 built-in customizable effects, comes with an included Bowens adapter mount for separately available light modifiers and is firmware upgradable.
SKU: NAN-NNFS60B -
LED continuous monolights and fresnels
Nanlite FS-150B Bi-Colour LED moonlight
The Nanlite FS-150B is an AC powered, bi-colour LED light for livestreaming, photo and video production that’s easy to use and provides professional-looking results—all in a compact and lightweight design with premium-quality construction that’s built to last. When you need brightness to light up a dark space, FS-150B can deliver up to 26300 Lux (2443 footcandles) of light at 1 meter with the included reflector. It can also be dimmed down to the exact brightness level you need. You can easily achieve different looks, from white sunshine to warmer, indoor tones, because FS-150B has an adjustable color temperature range of 2700K-6500K. It also has high CRI and TLCI ratings of 96 and 97, which means the colours you see will always be accurate.
SKU: NAN-NNFS150B -
Battery adapters and DC couplers
Nanlite BT-BG-XLR4 V-Mount Battery Grip for Forza 150/150B with 4 pin XLR
Battery adapters and DC couplersNanlite BT-BG-XLR4 V-Mount Battery Grip for Forza 150/150B with 4 pin XLR
Power the Forza 150/150B from a V-Mount battery.
This clever Nanlite battery mount holds a V-Mout battery and provides a 4-pin XLR connector output to suit lights such as the Forza 150
The battery handle grip can be handheld, or it can be mounted on a standard 5/8″ light stand.
The grip is compatible with V-mount 14.8V and 26V batteries with D-Tap connector.
*Light sold seperately
SKU: NAN-NNBTBGXLR4 -
Clamps Super and Spring
Nanlite AS-SCH-FZ Forza Ballast Clamp with Hook to fit larger light stands
Mount your Forza tower ballast to a larger diameter light stand.
The Nanlite AS-SCH-FZ mount is a larger and stronger version of the clamp included with the Forza 200, 300, 300B and 500. The AS-SCH-FZ mount is designed to fit larger diameter light stands.
SKU: NAN-NNASSCHFZ