Cables, connectors and leads
Showing 136–150 of 412 results
-
D-Tap cables and connectors
Kondor Blue D-Tap to DC Right Angle Coiled Cable (5.5 x 2.5mm) for Canon C70
D-Tap cables and connectorsKondor Blue D-Tap to DC Right Angle Coiled Cable (5.5 x 2.5mm) for Canon C70
Use this Coiled D-Tap to DC 5.5 x 2.5mm Barrel Cable to power the Canon C70, a monitor, light, or other accessory using an external D-Tap battery. One end of the coiled cable features a 5.5 x 2.5mm DC barrel right-angle connector, and the other end features a male D-Tap right-angle connector. The coiled cable can extend from 40.5cm (16″) to 81cm (32″) in length.
For use with Canon C70s, LCD Monitors, LED Lights, DSLRs, Blackmagic Video Assist, Small HD, Ninja V, V-Mount and Gold Mount Battery Power Rigs. Compatible with Atomos Battery Eliminator.
SKU: KBL-KB-700 -
D-Tap cables and connectors
Kondor Blue D-Tap to LEMO 2-Pin 0B Male Power Cable Straight Blue
The D-Tap to LEMO 0B-Type 2-Pin Male Power Cable is a blue cable for connecting a professional V-mount or Gold mount battery to a camera, wireless device, light, or other gear that can be powered with a 2-pin LEMO-type cable. The power cable has a D-Tap on one end and a 2-pin LEMO 0B-type connector on the other.
Compatible with: Teradek Bolt, Z CAM EVF, ARRI, RED, Paralinx, Preston, Switronix, SmallHD, Transvideo etc.
Pin-1 GND – This means that the pin next to the red dot is the ground.
SKU: KBL-KB-DTAPLEMO1 -
HDMI cables and connectors
Kondor Blue HDMI to HDMI 40cm Thin Braided Cable for on Camera Monitors
KONDOR BLUE 40.5cm Nylon HDMI to HDMI braided cable with High Speed 4K 3D – 60HZ HDMI, 2.0 18Gbps, HDR Metadata.
Connect your camcorder to your on-camera monitor with the 40.5cm (16″) Kondor Blue Braided High-Speed HDMI Cable. It supports 4K 60 Hz and 3D video and features a nylon braid.
This braided HDMI to HDMI cable for a camera monitor is suitable for use with Blackmagic Pocket Cinema Cameras, URSA G2 camcorders, and HDR 12G Video Assist monitors. Also, see our coiled HDMI cable, it stretches from 30.5cm (12″) to 61cm (24″).
SKU: KBL-KB-HDMI14 -
Brand-specific cables and connectors
Nanlite CB-DMX-3.5C-1/2 DMX Cable for Forza 150 and Forza 60C
The Nanlite CB-DMX-3.5C-1/2 cable is designed to control the Forza 150 and Forza 60C via DMX.
The cable adapts 3.5mm plug to standard 5-pin dual XLR connectors(both male and female) to permit connection of fixtures to DMX console. A unique design of dual adapted connectors allows for controlling multiple fixtures in series connection to bring about more stable performance out of fixtures in DMX connection.
SKU: NAN-NNCBDMX35C12 -
Brand-specific cables and connectors
Nanlite CB-DMX-ACP-1/2 DMX Cable for PavoTube II X
The Nanlite CB-DMXACP-1/2 cable is designed to control the Pavotube II X range of RGB LED tubes via DMX.
Featuring a 5 pin locking connector and 2 standard XLR 5 pin terminals both male and female.SKU: NAN-NNCBDMXACP12 -
D-Tap cables and connectors
Nanlite D-Tap to DC in adaptor cable for Forza 60 60B 60C Pavotube 15C 30C 15X 30X 70-140cm
D-Tap cables and connectorsNanlite D-Tap to DC in adaptor cable for Forza 60 60B 60C Pavotube 15C 30C 15X 30X 70-140cm
Power your Nanlite LED lights from a V-Lock Battery length 70-140cm
Using this Nanlite CB-DT/DC adaptor cable, the Forza 60, 60B and 660C runtime is up to 5 hours at full power from a 250Wh V-Lock battery!The curly cord allows the V-Lock to sit on the ground while the Forza is mounted on a light stand.
One end of this adaptor cable is D-Tap, the other end fits the DC-In port of the Nanlite LED Light.
The Nanlite CB-DT/DC is compatible with: Forza 60/60B/60C, PavoTube 15C/30C, Pavotube 15X/30X, and other lights powered by DC port
SKU: NAN-NNCBDTDC -
Brand-specific cables and connectors
Nanlite Header Cable 5m for Forza
Position your power pack further from your Forza head with this longer 5m cable.
This longer 5m cable gives you more flexibility for positioning a Forza LED light on a boom, or a light stand taller than 2.5m. This CB-FZ5 cable is 5m long, whereas the cable included with the Forza 300 and 500 is 2.5m.
SKU: NAN-NNCBFZ5 -
Brand-specific cables and connectors
Nanlite TRRS 3.5mm Male-to-Male cable for Pavotube
Connect Pavotubes together to sync setting adjustments.
Using this Nanlite Pavotube cable allows you to control multiple Pavotubes from a single lead Pavotube.
Compatible with 2ft and 4ft Pavotubes.
This coiled cable expands from 37 to 75cm.
SKU: NAN-NNCBTMS -
Brand-specific cables and connectors
Nanlite USB-C to DMX Cable for Pavotube T8 7X and Pavobulb
The Nanlite CB-DMX-USBC-1/3 control cable adds DMX/RDM Control to the Pavotube T8-7X and the Pavobulb.
When using the DMX/RDM control cable you can create more sophisticated animation effects. The cable has a Type-C connector at one end, and three DMX connectors to simultaneously connect to 3 x Pavotube T8 7X.SKU: NAN-NNCBDMXUSBC13 -