On light modifiers
Showing 1–15 of 24 results
-
On light modifiers
Arri 4-leaf barndoor (168 mm / 6.6″) for Orbiter Open Face 30° & 60° and L5
The 4-leaf barndoor allows for control of light spill and control of the beam. Different size optics require different size barndoors. Select the barndoor accordingly.
Lightweight and rugged design
4-leaf design with ARRI standard 168 mm / 6.6″
and 245 mm / 9.7″ diameter
Slides into accessory slot of open face opticsSKU: ARR-L2.79470.0 -
-
On light modifiers
Arri 4-leaf barndoor (245 mm / 9.7″) for Orbiter Open Face 15° and M8
The 4-leaf barndoor allows for control of light spill and control of the beam. Different size optics require different size barndoors. Select the barndoor accordingly.
Lightweight and rugged design
4-leaf design with ARRI standard 168 mm / 6.6″ and 245 mm / 9.7″ diameter
Slides into accessory slot of open face opticsSKU: ARR-L2.39870.0 -
On light modifiers
Arri 4-leaf barndoor (344 mm / 13.5″) for L10 and M18
The 4-leaf barndoor allows for control of light spill and control of the beam. Different size optics require different size barndoors. Select the barndoor accordingly.
Slides into accessory slot of Fresnel Lens 15-65°
Lightweight and rugged design
4-leaf design with ARRI standard 344 mm / 13.5″ diameterSKU: ARR-L2.40950.0 -
-
On light modifiers
Arri 4-leaf barndoor (584 mm / 23.0″) for M90
The ARRI 4-Leaf Barndoor Set for M90 Lamp Head is a light shaping tool that allows you to direct the light where you want it and keep it away from areas you don’t. It’s also useful for containing spill light from the fixture.
SKU: ARR-L2.37560.0 -
-
On light modifiers
Arri 4-leaf barndoor for SkyPanel S120-C
The 4-leaf barndoor for the SkyPanel allows for control of light spill and narrowing of the beam angle. Additional small flaps protect against light leak between the lamphead and the barndoors.
Lightweight and Rugged Design
Two safety hooks to hold the barndoor in place
Slides into outer accessory slot allowing for
changing of diffusion panels without the removal of the barndoorsSKU: ARR-L2.0010114 -
On light modifiers
Arri 4-leaf barndoor for SkyPanel S30
The 4-leaf barndoor for the SkyPanel allows for control of light spill and narrowing of the beam angle. Additional small flaps protect against light leak between the lamphead and the barndoors.
Lightweight and Rugged Design
Two safety hooks to hold the barndoor in place
4-leaf design with light leak flaps
Slides into outer accessory slot allowing for
changing of diffusion panels without the removal of the barndoorsSKU: ARR-L2.0008187 -
On light modifiers
Arri 4-leaf barndoor for SkyPanel S60
The 4-leaf barndoor for the SkyPanel allows for control of light spill and narrowing of the beam angle. Additional small flaps protect against light leak between the lamphead and the barndoors.
Lightweight and Rugged Design
Two safety hooks to hold the barndoor in place
4-leaf design with light leak flaps
Slides into outer accessory slot allowing for
changing of diffusion panels without the removal of the barndoorsSKU: ARR-L2.0007530 -
On light modifiers
Arri Intensifier for SkyPanel S120-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0009503 -
On light modifiers
Arri Intensifier for SkyPanel S30-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0007823 -
On light modifiers
Arri Intensifier for SkyPanel S360-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0015022 -
On light modifiers
Arri Intensifier for SkyPanel S60-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0007818 -
On light modifiers
Arri Open Face Kit incl. Bag, 15deg, 30deg & 60deg Open Face Optics for Orbiter
The Open Face kit for Orbiter is a convenient way to complete your set of Orbiter optics. The kit is lightweight and includes a 15°, 30° and 60° Open Face optic. The optics are packed in a robust bag with reinforced corners, all around-velcro fastenings and adjustable shoulder strap. With the customized foam inlay all parts are perfectly organised, well protected, and ready to go.
Features:
- Approx. 75 x 40 x 35 cm / 29.5 x 15.8 x 14.2″
- Robust soft bag with customized foam inlay for Orbiter Open Face optics
- Packed with Open Face optics 15°, 30° & 60°
- Lightweight, compact & ready to go
- Kit incl. bag, 15°, 30° & 60° Open Face Optics for Orbiter
SKU: ARR-L2.0041133