GoPro Dual-Battery Charger with Two Enduro Batteries suits HERO 11,10,9

D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A). 
Designed to work with equal power batteries where a larger capacity is preferred

LCD Display indicates Output Voltage

The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery Low

Output is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)

A Hexagon connector can be mounted to a stand using  a super clamp or convi clamp.

A handheld grip, battery buckle, and low mount stand all-in-one.

This clever Nanlite battery mount holds two Sony NP-F (L series) batteries to power the Nanlite Forza 60. The battery handle also doubles as a low-mount light stand.

The BH-FZ60 handle also makes it easy to handhold the Foza 60 for lighting moving subjects, for light painting, and for creating a ‘wash of light’ effect in your video.

The battery handle grip can be mounted on a light stand when you wish to power your Nanlite Forza 60 from NP-F batteries.

The BH-FZ60 battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B.

• More cost effective than purchasing multiple proprietary camera batteries
• Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
• Never need to charge camera batteries again. And never run out power.
• Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
• A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.