TecArt LEDrive CC 12 Wall Mount (320W) DMX/RDM

LEDrive CC 6 DIN Rail is a constant current LED dimmer, utilising DMX/RDM. It features advanced 16 bit dimming technology, allowing different dimming curves to be set. The unit is flicker free and film and TV compatible. Standalone speed-adjustable fade effects can be triggered by RDM. The unit has 6 channels of output, for use with up to 1200mA LEDs.

RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.

RDM or Remote Device Management is a protocol enhancement to DMX512 that allows bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.

LEDrive CC 6 DIN Rail can be supplied with an external 12 – 48VDC power supply.

FEATURES
• DMX-512 input and output.
• External power supply 12 – 48VDC.
• Terminal strip output.
• 2 main indication LEDs.
• Operating modes:
1. Pre-programmed lighting scenes: Choose from several pre-programmed scenes via RDM.
2. Control of the channels via DMX.

SPECIFICATIONS
• Input voltage: 10 – 48VDC.
• Power supply: External.
• Dimensions: 110mm (L) x 90mm (W) x 60mm (H).
• Mounting method: DIN Rail.
• DMX working mode: 6 channels.
• DMX signal input: Terminal strip/RJ45.
• DMX signal output: Terminal strip/RJ45.
• Outputs: 6 channels.
• Addressing: Via RDM.
• Driving capacity: Up to 1200mA per channel.
• Temperature: 0 – 40 degrees Celsius.

LEDrive CV 24 Wall Mount is a constant voltage LED dimmer, utilising 0-10V analogue control. High PWM frequency (10 KHz) makes it flicker free and film and TV compatible. The unit has 24 channels of output, each with 5A fuse protection. It has a built-in 640W power supply.

FEATURES
• 0-10V control input.
• 2 x internal power supply 12/24VDC 320W.
• Terminal strip output.
• 1 main indication LED.

SPECIFICATIONS
• Input voltage: 100 – 240VAC.
• Power supply: Internal 2 x 320W. Can be used with external power supply.
• Dimensions: 270 (W) x 530 (L) x 70 (H).
• Mounting method: Desktop, Wall or Ceiling.
• Control input: Terminal strip.
• Outputs: 24 channels.
• Driving capacity: Up to 5A per channel, with combined total of 640W across all channels using the built-in power supply.
• Output voltage: Equal to input voltage – stabilised voltage (PWM).
• Temperature: 0 – 40 degrees Celsius.

LEDrive CV 1 Desktop is a high output single channel desktop driver for constant voltage LEDs. This unit is controlled via potentiometer or push dimm. It features terminal strip output and input connector and 5A driving capacity.

LEDrive CV 1 Desktop can be supplied with an external 12 – 36VDC power supply.

FEATURES
• Potentiometer or push dimm control.
• External power supply 12 – 36VDC.
• Terminal strip output.

SPECIFICATIONS
• Input voltage: 10 – 36VDC.
• Power supply: External.
• Dimensions: 120mm (L) x 30mm (W) x 30mm (H).
• Mounting method: Desktop.
• Control input: Terminal strip.
• Outputs: 1 channel.
• Driving capacity: Up to 5A per channel.
• Output voltage: Equal to input voltage – stabilised voltage (PWM).
• Temperature: 0 – 40 degrees Celsius.