Featured categories
Your Recently Viewed Products
Shure DMK57-52 Drum Microphone Kit
The Shure DMK57-52 is a great drum microphone kit designed to deliver the very best sound for your kit on stage or in the studio. All the microphones feature a great sound and Shure’s legendary build quality making them perfect for bands on tour.
Manfrotto Rain Cover Pro RC-1 Manfrotto Pro-Light
If you need to protect your large camcorder from the rain and other weather elements, then look no further than this Manfrotto Pro Light Camera Element Cover. Bad weather doesn’t always mean your plans have to be cancelled; this waterproof video rain cover will slip over your equipment and stand up against even the heaviest downpour. Made from RipStop material, you can easily see the camera controls through the crystal clear thermoplastic polyurethane (TPU) panels so you won’t ever have to worry about not being able to capture that perfect shot. An open vent on the underside of the camcorder not only allows for airflow but gives you the opportunity to connect a tripod, meaning that your shots can remain steady and smooth wherever you are and whatever the weather’s like outside. Even if you’re looking for a cover to protect your large camcorder from dust while it’s in storage, this will do the trick, and ensure that your camera remains protected from dust and other elements, extending its life and making sure that, when you go to use your camera again, it will be in the condition you left it in.
Cotton Carrier G3 Grey Wanderer Side Holster 508GREY
Included:
Rip-Tie CableWrap 10 Pack Rainbow 25mm x 15cm
The Rip-Tie 1 x 6″ Heavy-duty CableWrap (10 Pack) (Rainbow) is a re-usable “hook and loop” fastener that keeps cables neatly and safely out of your way. One end permanently attaches to the cable; the other end has a pull tab to free it with one hand. It is made of hook and loop touch fastener material that has been tested for 10,000 closures with no loss of holding strength.
Manfrotto Plate Video Camera suits MVH500A and MVH500AH
This long version of the standard plate allows perfect balance for camcorders with unusual weight distribution caused by long telescopic lenses or heavy batteries. Supplied with 1×1/4” and 1 x adapter from ¼’’ to 3/8” camera screws and anti-rotation pin.
Godox V860IIIN I-TTL Li-Ion Flash For Nikon
Power, speed, and integrated radio transmission make the Ving V860III TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Canon cameras. Fully compatible with TTL systems, the Ving V860III supports many advanced functions and features. Also, it features the Godox X wireless radio system, which provides both master and slave TTL functionality at a distance.
On top of this, the flash is powerful and versatile, featuring a guide number of 197′ at ISO 100 and 200mm along with a zoom range of 20-200mm. And this flash runs off a rechargeable lithium-ion battery pack that ensures fast recharge with a capacity of up to 480 full-power flashes.
For general operation, the Ving V860III features full bounce flash capabilities, including tilting and rotation left and right. As a TTL-compatible unit, this flash offers support for high-speed sync, flash exposure compensation, 1st and 2nd curtain sync, and much more. Additionally, it can function as an optical master or slave unit if needed.
What’s included
Savage Vinyl Photo Grey Backdrop 2.75m x 3.04m
“¢ Professional-quality vinyl
“¢ Durable
“¢ Easy to clean
“¢ Seamless, hangs straight for a flawless background
“¢ Sturdy core prevents wrinkles
“¢ 500 g/sm thickness
“¢ Core diameter: 2.125” (interior)
“¢ Recommended accessory for large vinyl sizes: Heavy-duty aluminium background core
TecArt Splitter DIN Rail DMX 4 way
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.
SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.
Miller Arrowx 5 Solo 100 3 Stage Carbon Fibre Tripod System
The 3128 Carbon Fibre, Solo-Q 100, 3-stage Arrowx 5 system, is designed for speed of setup, high level of stability and flexibility of payloads, The 2520 spreader less three stage tripod, included in this system provides the ultimate range of heights, speed of set up and works perfectly on all terrains.
Featuring a wide payload range, precision fluid drag and Miller’s innovative 16 position CB Plus™ counterbalance system, Arrowx 5 delivers the flexibility, speed of set up and accuracy of shot, professionals expect and demand.
2-21kg (4.4-46.2lbs) payload range and 7 + 0 selectable pan-tilt fluid drag positions make Arrowx 5 ideal for ENG and EFP, enabling it to be used with a wide range of cameras, lenses and accessories and offering.
The Arrowx 5 is matched with the 3 stage Solo-Q (carbon fibre) tripod that results in range topping height range of 390-2041mm (15.3-80.38″), all terrain versatility in the lightest Arrowx system package.