Lens accessories
Showing 31–45 of 55 results
-
Lens control systems
Tilta Nucleus-M 19mm Rod Adapter with 15mm Bushings
This Nucleus-M motor rod mount slides onto the Nucleus-M motor to allow you to attach the motor to your rod setup. When clamped down, the mount fits comfortably around 19mm rods but then also includes removable bushings to allow you to mount to 15mm rods as well.
Weight: 0.071 lbs
Color: Black
Material: Aluminum-alloy, stainless steelSKU: TIL-WLC-T03-MRA -
Lens control systems
Tilta Nucleus-M Follow Focus marking Disk (x1)
This follow focus marking disk attaches to the hand wheel of the FIZ hand unit to allow you to create drawn-on custom marks for accurate focus pulls.
1. (1) Tilta Nucleus-M Follow Focus Marking Disk
Color: White
Materials: ABS plasticSKU: TIL-WLC-T03-MD-1 -
Lens control systems
Tilta Nucleus-M Motor Kit 1
This Nucleus-M motor kit allows you to add a motor to your Nucleus-M kit along with the 7-pin to 7-pin power cable that allows you to power the motor from a daisy-chained connection to another Nucleus-M motor.
Color: Tilta Gray
Materials: Aluminum-alloy, stainless steelSKU: TIL-WLC-T03-M1 -
Lens control systems
Tilta Nucleus-M P-TAP to 7-Pin Motor Power Cable
This P-tap to 7-pin cable for the Nucleus-M allows you to power the motors from a P-tap power output port. Simply plug this cable into one of the motors and then daisy chain power to the other motors using the Nucleus-M 7-pin to 7-pin power cables.
Weight: 0.08 lbs
Length: 76.8 cm
Color: Black
Materials: ABS plastic, copper, rubber, aluminum-alloySKU: TIL-WLC-T03-PTAP-7P -
Lens control systems
Tilta Nucleus-M Wireless Lens Control System Partial Kit I AU plug without batteries
Lens control systemsTilta Nucleus-M Wireless Lens Control System Partial Kit I AU plug without batteries
It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet.
The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time.
Simply set the motors and hand unit/hand grips to the same channel and you will have full control.
The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity.
The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup.
Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5N·m
To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.
The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V.
The hand unit and hand grips are each powered with two 18650 rechargeable batteries (batteries NOT included). When fully charged, the batteries in the hand grips last up to 2 days, while in the hand unit they last up to 10 hours.
Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor. This then gives you R/S capabilities through the hand unit and/or the handles.
** PLEASE NOTE: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-M since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M.
Only use cables that have been developed by us exclusively for the Nucleus-M system.
Weight:
Motor Dimensions:
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood
Color: Tilta Gray
Recommended Battery Link: https://tilta.com/support/which-batteries-do-you-recommend-for-the-g2-g2x/
Tiltamax Nucleus-M Firmware Update 18.12.19 – December 2018SKU: TIL-WLC-T03-K1 -
Lens control systems
Tilta Nucleus-M Wireless Lens Control System Partial Kit IV AU plug without batteries
Lens control systemsTilta Nucleus-M Wireless Lens Control System Partial Kit IV AU plug without batteries
It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet.
The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time.
Simply set the motors and hand unit/hand grips to the same channel and you will have full control.
The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity.
The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup.
Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5N·m
To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.
The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V.
The hand unit and hand grips are each powered with two 18650 rechargeable batteries (batteries NOT included). When fully charged, the batteries in the hand grips last up to 2 days, while in the hand unit they last up to 10 hours.
Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor. This then gives you R/S capabilities through the hand unit and/or the handles.
** PLEASE NOTE: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-M since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M.
Only use cables that have been developed by us exclusively for the Nucleus-M system.
Weight:
Motor Dimensions:
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood
Color: Tilta Gray
Recommended Battery Link: https://tilta.com/support/which-batteries-do-you-recommend-for-the-g2-g2x/
Tiltamax Nucleus-M Firmware Update 18.12.19 – December 2018SKU: TIL-WLC-T03-K4 -
Lens control systems
Tilta Nucleus-Nano Micro USB to USB-C Nano Motor Power Cable
This Micro USB to USB-C cable for the Nucleus-Nano allows you to power the motor from a USB-C power output port.
This makes this cable the perfect solution for powering the motor from the DJI RS2.
This cable can also be used to power and control the Nano motor via our Advanced Side Handles.
Please Note: this cable cannot power the Nano motor from a camera body
SKU: TIL-WLC-T04-USBC -
Lens control systems
Tilta Nucleus-Nano Motor Micro USB to RS 2 8V Power Cable
This RS 2 8V to Micro USB Power Cable for the Nucleus-Nano allows you to power the motor from the DJI RS 2’s 8V USB-C power output port.
This higher voltage cable provides additional torque that the Nucleus Nano Motor can benefit from for harder to move lenses.
SKU: TIL-WLC-T04-PC-RS2 -
Lens control systems
Tilta Photographic Lens Follow Focus Gear Ring(1x)
This follow focus adapter allows you to use your DSLR photo lens with any of the TILTA Follow Focus Systems. Simply tie the adapter down around the DSLR photo len’s focus wheel and now you can use the photo lens as a cine lens compatible with whichever follow focus system you desire.
(1) Photographic Lens Follow Focus Adapter
Color:
Black
Material:
Silicone Rubber
ABS plasticSKU: TIL-FR-T03 -
Lens filter systems and matte boxes
Tilta Rotatable Circular Filter Tray for Tilta Mirage
This Rotatable Circular Filter Tray for Tilta Mirage allows you to rotate any 95mm Circular Filter the same you would any of the rotatable modules.
This is the perfect solution for fine tuning the angle of our 95mm Polarizer Filter which will help improve color accuracy by limiting reflected light and preventing unwanted glare caused by reflective surfaces such as water or glass.
This Filter Tray is also a great option for adjusting the horizon of some of our effect filters such as our 95mm Streak Filter, ensuring any flares are always level in your image.
The adjustable gear on the top of the filter can be rotated by hand or can be upgraded for more comfortable and precise adjustments via our Advanced Control Knob.
This Filter Tray can also be wirelessly controlled via a Nucleus Nano motor and our Nano Motor Adapter or via the Wireless Motor for Tilta Mirage.SKU: TIL-MB-T16-RCF -
Lens filter systems and matte boxes
Tilta Rubber Hood for Tilta Mirage
This Rubber Hood for Tilta Mirage is a lightweight, rubber alternative to the one included with the kit.
Simply snap off the original Front Hood and snap on this rubber version for situations that require additional safety such as stunt work or extreme close ups.
Note: This is not compatible with the Top Flag.
SKU: TIL-MB-T16-RH -
Lens control systems
Tilta Seamless Focus Gear Ring for 59mm to 61mm Lens
Gear ring sizes cover all lens models. Unique materials guarantee flexibility and durability. Accurate focus and no skipping. Silent action and smooth operation.
Protects your lens. Reduces lens gear abrasion. 360 degree seamless rotation. No resistance. Smooth focusing rotation.
With metallic and plastic follow focus gears. Flexible yet rugged. Scratch resistant.
Easy to cut design, multi-purpose, flexible application, fits different lens focus gear widths.
Fully closed gear ring. Evenly distributed pressure. Durable & firm attachment with no drifting. Prevents lens damage
Every focus gear ring is engraved with mod number and matching lens diameter.
This seamless gear ring allows you to add a 0.8m toothed ring to photographic lenses to allow for the use of cinema follow focuses. Find compatible rings in our support section.SKU: TIL-TA-FGR-5961 -
Lens control systems
Tilta Seamless Focus Gear Ring for 66mm to 68mm Lens
Gear ring sizes cover all lens models. Unique materials guarantee flexibility and durability. Accurate focus and no skipping. Silent action and smooth operation.
Protects your lens. Reduces lens gear abrasion. 360 degree seamless rotation. No resistance. Smooth focusing rotation.
With metallic and plastic follow focus gears. Flexible yet rugged. Scratch resistant.
Easy to cut design, multi-purpose, flexible application, fits different lens focus gear widths.
Fully closed gear ring. Evenly distributed pressure. Durable & firm attachment with no drifting. Prevents lens damage
Every focus gear ring is engraved with mod number and matching lens diameter.
This seamless gear ring allows you to add a 0.8m toothed ring to photographic lenses to allow for the use of cinema follow focuses. Find compatible rings in our support section.SKU: TIL-TA-FGR-6668 -
Lens control systems
Tilta Seamless Focus Gear Ring for 72mm to 74mm Lens
Gear ring sizes cover all lens models. Unique materials guarantee flexibility and durability. Accurate focus and no skipping. Silent action and smooth operation.
Protects your lens. Reduces lens gear abrasion. 360 degree seamless rotation. No resistance. Smooth focusing rotation.
With metallic and plastic follow focus gears. Flexible yet rugged. Scratch resistant.
Easy to cut design, multi-purpose, flexible application, fits different lens focus gear widths.
Fully closed gear ring. Evenly distributed pressure. Durable & firm attachment with no drifting. Prevents lens damage
Every focus gear ring is engraved with mod number and matching lens diameter.
This seamless gear ring allows you to add a 0.8m toothed ring to photographic lenses to allow for the use of cinema follow focuses. Find compatible rings in our support section.SKU: TIL-TA-FGR-7274 -
Lens control systems
Tilta Seamless Focus Gear Ring for 75mm to 77mm Lens
Gear ring sizes cover all lens models. Unique materials guarantee flexibility and durability. Accurate focus and no skipping. Silent action and smooth operation.
Protects your lens. Reduces lens gear abrasion. 360 degree seamless rotation. No resistance. Smooth focusing rotation.
With metallic and plastic follow focus gears. Flexible yet rugged. Scratch resistant.
Easy to cut design, multi-purpose, flexible application, fits different lens focus gear widths.
Fully closed gear ring. Evenly distributed pressure. Durable & firm attachment with no drifting. Prevents lens damage
Every focus gear ring is engraved with mod number and matching lens diameter.
This seamless gear ring allows you to add a 0.8m toothed ring to photographic lenses to allow for the use of cinema follow focuses. Find compatible rings in our support section.SKU: TIL-TA-FGR-7577