Camera rig attachments, brackets and components
Showing 31–45 of 183 results
-
Camera rig attachments, brackets and components
Tilta Advanced kit for BMPCC 6K Pro- Black
0 out of 5(0)Compatible with the original battery grip from Blackmagic Design. Under the half cage setup, remove the bottom plate and secure it to the bottom of the battery grip.
With the original battery grip mounted, the 15mm rod holder and 15mm rods can be installed to mount a follow focus, lens support, etc.
Newly patented viewfinder extension. Provides a fully immersive operating experience.
Find your best viewing angle. Easily adjustable for different user’s operating needs. Provides the best view for operating.
Extremely adjustable. The connecting joint supports 360° adjustment. The support arm can be adjusted both horizontally and vertically.
The top plate has 3 built-in cold shoe mounts and 1/4”-20 screw holes for mounting various accessories.
Supports the new Tilta M.2 SSD case. Easily mounts onto any 1/4”-20 screw holes on the camera cage.
Compatible with T5 and T7 SSD drives.
Includes ARRI Compatible Rosette, 1/4”-20 Screw Holes with Locating Points, and NATO Rail.
90° angled cable adapter for more secured mounting. Provides more efficient operating and data protection.
With the NATO rail adapter mounted, it can be installed to any 1/4”-20 screw hole.
Reserved space for securing an M.2 SSD case.
From Blackmagic Design.
Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro and 6K G2.
This Basic Kit for the BMPCC6K Pro/G2 provides protective armor for the camera body and includes relevant accessories to improve functionality.
The Full Cage offers several 1/4”-20 threads with locating pins, cold shoe receivers, a NATO Rail for Type IV and VI Side Handles, as well as Rod Attachment Ports for our Single Rod Holders.
It also features ARRI compatible rosettes, which are specifically designed for our Adjustable Top Handle Plus for more flexible operating and handling.
The right side arm module can be removed to turn this Full Cage into a Half Cage.
This offers more flexibility in situations where lighter builds are required such as when using a gimbal.
The Bottom Plate provides several ¼”-20 mounting points for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate.
When using the Half Cage, the bottom plate can be extended to support the Black Magic Design Battery Grip.
A 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in a Half Cage setup.
When not using the Battery Grip, the included Quick Release Plate can be used to connect the camera cage to the included 15m LWS Baseplate Type VI.
The 15mm LWS Baseplate adds 15mm rod support to the system and allows you to mount rod based accessories such as matte boxes and follow focus systems.
The bottom of this baseplate natively connects to our Tilta Standard Dovetails and also supports various quick release plates via 1/4″-20 and 3/8″-16 threads.
The Advanced Power Handle mounts to the left side of the cage via a NATO Rail connection.
This handle features a 12V Micro DC Port (3.5/1.35mm) and an 8V USB-C port for powering your camera body or other accessories like our Nucleus Nano Wireless Lens Control System.
The handle is also able to control Run Stop on the BMPCC 6K Pro/G2 via an included Run Stop Cable.
The rotation of the handle and additional hand strap allows for comfortable and flexible operation of your camera system when shooting handheld.
The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and can be further secured by a 1/4”-20 screw.
This provides an extremely secure connection to comfortably handle and operate your camera when shooting low angles.
The Top Handle features additional 1/4”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs.
The SSD Drive Holder attaches directly to the cage via a 1/4″-20 screw and locating pin.
It can then clamp onto a m.2 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card.
The included USB-C cable is then able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.
This creates an extremely secure connection between your camera and drive.
The 90 Degree HDMI Adapter mounts to the cage near the camera’s HDMI port and offers a secure connection that limits wear on the port itself.
NOTE: If you receive a kit with a T7 Holder, please contact us at: [email protected]
1:Full Camera Cage for BMPCC 6K Pro *1
2:Tiltaing Quick Release Handle *1
3:Tiltaing SSD Drive Holder for T5 *1
4:Tiltaing Left Side Advanced Power Handle with Run/Stop (F570 Battery) *1
5:Tiltaing Advanced Left Side Handle Attachment Type VI *1
6:Advanced Side Handle Run/Stop Cable for USB-C Port(RS-TA3-USBC)*1
7:Tiltaing 15mm LWS Baseplate Type VI *1
8:HDMI 90-Degree Adapter for BMPCC 4K/6K(TA-T01-HDA-90)*1
9:90-Degree USB-C Cable (30cm) for BMPCC 4K/6K(CB-USBC-30)*1
10:Aluminum rod 15*200mm Black *2
11:Aluminum rod 15*100mm Black *2
12:Connection Screw for 15mm Rod *2
13:Accessory Mounting Bracket for BMPCC 6K Pro Battery Grip *1
Dimensions: 13 x 6.5 x 3.5 inches
Weight: 3.1 lbs
Net Weight: 0.4 lbs
Materials: Aluminum alloy, stainless steel
Color: Black, Tactical GraySKU: TIL-TA-T11-A-B$820.00 -
Camera rig attachments, brackets and components
Tilta Advanced Rear Operating Control Handle for DJI Ronin
Camera rig attachments, brackets and componentsTilta Advanced Rear Operating Control Handle for DJI Ronin
0 out of 5(0)The Advanced Rear Operating Control Handle features all the benefits and features of the previous model, but now includes increased clearance specifically for accommodating the larger size of the DJI RS3 Pro.
This system provides a convenient way to capture lower angle shots while providing more gimbal control than the traditional Briefcase Mode.
The Joystick allows you to control the RS3 Pro or RS2 Gimbal while the finger dial can control the DJI Wireless Focus Motor, the Nucleus M and Nucleus Nano motor, or well as the gimbal’s preset “Dial Function.”
This handle mounts via the NATO connectors on the side of the RS2 and RS3 Pro gimbal body and powers via the Ronin’s Battery Handle.
The Advanced Rear Operating Control Handle also features various mounting points for accessories like external monitors or on board microphones.
RS3/RS3 Pro: The M Key is NOT able to mimic the function of the gimbal. The M Key on this unit can ONLY change the Mode setting.SKU: TIL-TGA-ARH2$310.00 -
Camera rig attachments, brackets and components
Tilta Battery Handle Base Accessory Mounting Bracket
0 out of 5(0)This bracket attaches to the bottom of your gimbal’s battery handle to allow you to mount the gimbal tripod along with other accessories if desired.
The Bracket features 1/4″-20 and 3/8″-16 screw holes on the bottom as well as the two small NATO rails that are attached to sides of the bracket.
Compatible with the DJI RS2, RSC2, RS3, RS3 Pro.SKU: TIL-TGA-BHB$27.00 -
Camera rig attachments, brackets and components
Tilta BMPCC 4K Side Handle to BMPC 4K camera power cable
Camera rig attachments, brackets and componentsTilta BMPCC 4K Side Handle to BMPC 4K camera power cable
0 out of 5(0)This cable allows you to power the BMPCC 4K/6K via a 12V Micro DC power connection through the camera’s power input port.
Compatible with the several different BMPCC 4K/6K battery power side handles.
SKU: TIL-TCB-BMPC-DCM12$28.00 -
Camera rig attachments, brackets and components
Tilta BMPCC4K Power to PTAP Cable
0 out of 5(0)This P-tap power cable can be used to provide greater battery life for your BMPCC 4K/6K camera with the variety of battery plates and battery baseplates that we offer. The P-tap end goes into one of the P-tap outputs on the battery plates and battery baseplates and then the other end goes into the power input port of the BMPCC 4K/6K.
Weight: 0.053 lbs
Length: 43.82 cm
Color: Black
Materials: Copper, rubber, aluminum-alloy, ABS plasticSKU: TIL-TCB-BMPC-PTAP$55.00 -
Camera rig attachments, brackets and components
Tilta Bottom Mounting Plate for RED V-RAPTOR
0 out of 5(0)This Mounting Plate attaches near the bottom of the Full Camera Cage for RED V-RAPTOR.
It offers some additional ¼”-20 mounting points with locating pins and serves as an alternative location to mount the Advanced I/O Module.
NOTE: Access to the media door will be limited when using this plate.
SKU: TIL-ESR-T08-BMP$27.95 -
Camera rig attachments, brackets and components
Tilta Bottom Plate for Panasonic GH6 – Black
0 out of 5(0)This Bottom Plate connects to the bottom of the Full Camera Cage for Panasonic GH6.
This plate connects via two points of contact in order to provide a more secure connection for your system.
This plate allows you to bridge the camera cage to our 15mm LWS Baseplate Type I in order to mount 15mm rod based accessories or easily connect to Tilta Standard Dovetails.
SKU: TIL-TA-T15-BP-B$18.00 -
Camera rig attachments, brackets and components
Tilta Carbon Fiber Top Flag for MB-T12
0 out of 5(0)This carbon fiber top flag attaches directly to the 4.5.65 Carbon Fiber Clamp-on Matte Box (MB-T12) to provide coverage from light flares. Simply slide it into the notches on the top of the matte box, adjust it to the desired angle, then rotate the two tightening toggles to lock it in.
SKU: TIL-MB-T12-FT$111.00 -
Camera rig attachments, brackets and components
Tilta Cooling System for Sony ZV-E1 – Black
0 out of 5(0)The updated Cooling System for Sony ZV-E1 is the perfect accessory for users looking to shoot for longer periods of time in environments with higher temperatures.
The system seamlessly mounts to the Full Camera Cage for Sony ZV-E1 via dual thumbscrews, which makes the installation process fast and efficient.
This cooling module can be conveniently powered via USB-C which gives users plenty of options for powering the module.
The system also features an adjustable fan, allowing you to change the speed for variable shooting situations, which is especially useful when capturing audio.SKU: TIL-TA-T35-CS-B$130.00 -
Camera rig attachments, brackets and components
Tilta DC Power Cable
0 out of 5(0)This DC power cable can be used to provide greater battery life for your BMPCC 4K camera with the variety of battery plates and battery baseplates that we offer. The DC end goes into one of the several DC outputs on the battery plates and battery baseplates and then the other end goes into the power input port of the BMPCC 4K.
SKU: TIL-TA-T01-DC-PC$26.04 -
Camera rig attachments, brackets and components
Tilta Dual Handle Bracket for DJI Ronin
0 out of 5(0)The Dual Handle Bracket for DJI Ronin connects to the NATO mount of your DJI RS2, RSC2, RS3 or RS3 Pro, allowing you to operate your gimbal via two points of contact for more control and smoother performance.
The handles themselves can be rotated in various positions in order to accommodate comfortable operation for many different configurations.
This allows you to operate the gimbal in both an upright and underslung position.
The brackets that connect the handles to the gimbal, include mounting points such as 1/4″-20 and Cold Shoe in order to accommodate additional accessories.
This kit includes a cloth Travel Bag for storage and transport.SKU: TIL-TGA-DHB2$198.00 -
Camera rig attachments, brackets and components
Tilta Dual Handle Power Supply Bracket for RS 2
0 out of 5(0)The Dual Handle Power Supply Bracket for DJI Ronin allows you to power your DJI RS2, RS3, or RS3 Pro via a Gold or V-Mount battery, provides additional stability while operating, and features multiple mounting points for attaching accessories.
The Power Supply Bracket allows you to mount the Ronin’s Battery Handle on the left side for additional battery life, while the threads on the right side allow for mounting the included mechanical handle in various positions and distances from the gimbal body.
The Power Supply Bracket also supports the Advanced Ring Grip’s Remote Control Handle and Dual Channel Wireless Lens Control Handle which allows full control of the DJI RS2 or RS3 Pro and wireless follow focus systems like the Nucleus M or Nano.
NATO Rail and ¼”-20 threads allow for multiple accessories to be mounted including the DJI Ronin’s Tripod/Extended Grip.SKU: TIL-TGA-DHB$470.00 -
Camera rig attachments, brackets and components
Tilta EF Mount Adapter Support for Canon R5C – Black
0 out of 5(0)This EF Mount Adapter Support for Canon R5C attaches to the front of the cage via M3 screws and provides additional support for an RF to EF Lens Mount Adapter.
This provides an additional point of contact between your cage and lens adapter which helps create a more secure connection and limits any shifts in the image that could be caused by follow focus systems.
SKU: TIL-TA-T32-LAS-B$18.00 -
Camera rig attachments, brackets and components
Tilta EF Mount Lens Adapter Support for Panasonic BGH1 – Black
Camera rig attachments, brackets and componentsTilta EF Mount Lens Adapter Support for Panasonic BGH1 – Black
0 out of 5(0)This bracket attaches to the front of the Tiltaing camera cage for Panasonic BGH1 to provide support for a EF mount lens adapter.
SKU: TIL-TA-T21-LAS-B$24.00
Showing 31–45 of 183 results