Lens accessories
Showing 1–15 of 55 results
-
Lens filter systems and matte boxes
Tilta 14500 Power Supply for Tilta Mirage Motor
WARNING: Do not power the motor via USB-C while this Power Supply is attached.
The 14500 Power Supply for Tilta Mirage Motor attaches directly to the motor and allows you to power it via a single 14500 battery.
This is the perfect lightweight solution for powering the Wireless Motor for Tilta Mirage.
NOTE: The Motor will draw a small amount of power from this unit when powered off.
Please remove the battery from this unit when not in use.
SKU: TIL-MB-TM-PS -
-
Lens control systems
Tilta 300mm Follow Focus Whip
When in cramped spaces or in situations where the focus puller will be in the way of the camera operator’s ability to operate, use this 300mm focus whip to pull focus at a distance away from the follow focus’ hand wheel.
Dimensions: 15 x 3 x 3 inches
Weight: 0.245 lbs
Color: Black
Materials: ABS plastic, stainless steel
Length: 300mm (30cm)SKU: TIL-SW-T030 -
Lens filter systems and matte boxes
Tilta 4*4 lightweight matte box
This 4×4 lightweight matte box features a swing-away design for easy lens changes on 15mm LWS rods. It’s small size and lightweight design makes it ideal for smaller rigs or if you’re needing to have a lightweight setup for your camera. Two filter stages allow for multiple filters to be used at once, one of which is 360-degree rotatable. Included in the package is one top French flag to provide flare protection and a fabric lens donut to prevent any light leaks.
SKU: TIL-MB-T05 -
Lens filter systems and matte boxes
Tilta 4*5.65 carbon fiber matte box(clamp-on) 110mm lens adapter ring included
Lens filter systems and matte boxesTilta 4*5.65 carbon fiber matte box(clamp-on) 110mm lens adapter ring included
This 4×5.65 carbon fiber matte box is designed to clamp directly onto standard sized cinema lenses in order to be as lightweight and unobtrusive as possible.
It includes multiple lens adapter rings to fit most standard front diameters sizes.
Additional sized backings can be purchased separately.
These adapter rings not only allow the matte box to directly attach to the lens, but it forgoes the need for lens donuts.
Included in the package is one top French flag to provide flare protection.
It also includes an 15mm rod attachment if you wish to mount the matte box via LWS rods.
1. Carbon fiber body
2. (3) 4×5.65 filter frames
3. (1) Top French flag
4. (1) 15mm LWS rod adapter
5. Ф134mm, 114mm, 110mm, 95mm, 80mm clamp attachments
6. (5) Hard mattes (16-20mm, 24-28mm, 32-35mm, 50-85mm, 85-180mm)
Dimensions: 13 x 10 x 5.5 inches
Weight: 4.2 lbs
Net Weight: 2.6 lbs
Material: Carbon fiber, aluminum-alloy, stainless steel
Color: Black
Rod System: 15mm LWSSKU: TIL-MB-T12 -
Lens filter systems and matte boxes
Tilta 4×4 carbon fiber matte box
This 4×4 carbon fiber matte box features a swing-away design for easy lens changes. It is designed for use on 15mm LWS rod systems. Two filter stages allow for multiple filters to be used at once, one of which is 360-degree rotatable. Included in the package is one top French flag and two side flags to provide optimal flare protection. Additionally, a fabric lens donut is provided to prevent any light leaks.
SKU: TIL-MB-T03 -
Lens filter systems and matte boxes
Tilta 4×5.65 Stackable Filter Tray for Tilta Mirage
This Stackable Filter Tray connects to the 4×5.65 Stackable Filter Tray Holder which allows you to secure an additional 4×5.65 filter in front of your lens.
This Filter Tray Holder also allows you to secure additional 4×5.65 Stackable Filter Trays which makes it possible to mount as many 4×5.65 filters as needed.
NOTE: This requires a Stackable Filter Tray Holder to mount to the Tilta Mirage
SKU: TIL-MB-T16-SFT -
Lens filter systems and matte boxes
Tilta 4×5.65 Stackable Filter Tray Holder for Tilta Mirage
This Stackable Filter Tray Holder replaces the Rubber Hood on the Tilta Mirage Matte Box and allows you to secure a 4×5.65 Stackable Filter Tray (not included) in front of your lens.
This Filter Tray Holder can be used in conjunction with multiple 4×5.65 Stackable Filter Trays which makes it possible to mount as many 4×5.65 filters as needed.
*THIS REQUIRES A 4×5.65 FILTER TRAY TO MOUNT A FILTER*
NOTE: This cannot be used with the Rubber Hood
SKU: TIL-MB-T16-SFH -
-
Lens filter systems and matte boxes
Tilta 95mm Polarizer Filter for Tilta Mirage
This 95mm Polarizer Filter was developed in close collaboration with top tier optical manufacturers to create a high end rotatable circular polarizer uniquely fitted for the Tilta Mirage Matte Box.
Using new PL + CPL technology, this Polarizer Filter can produce accurate and vibrant colors by limiting reflected light and preventing unwanted glare caused by reflective surfaces such as water or glass.
The 95mm Polarizer accommodates the same lightweight configurations as the VND Module and can be secured directly to a 95mm lens or Adapter Ring via the Lightweight Filter Clamp-On Adapter.
The Polarizer module can be wirelessly controlled by an optional Wireless Motor to remotely rotate the filter which can offer more flexibility and save time while shooting.
NOTE: This is not compatible with and cannot be used at the same time as the 95mm Variable ND Module
SKU: TIL-MB-T16-POLA -
Lens filter systems and matte boxes
Tilta 95mm Stackable Circular Filter Tray for Tilta Mirage
This Stackable Circular Filter Tray Holder replaces the Rubber Hood on the Tilta Mirage Matte Box and allows you to secure an additional 95mm Circular filter in front of your lens.
This is the perfect solution for using 95mm circular special effect filters at the same time as the VND Module and also allows you to mount the Rubber Hood to the front of the Tray.
This allows you mount a maximum of (4) 95mm circular filters when using Dual Filter Trays. Only one Stackable Filter Tray can be mounted at a time.
NOTE: To prevent vignetting, you will need to use focal lengths beyond 35mm for Full Frame and 24mm for S35.
The Wireless Motor cannot be mounted to the VND Module when inserted in the Stackable Tray’s Filter Slot.
The Power Supply for Tilta Mirage Motor is not compatible when using the Stackable Filter Tray.
SKU: TIL-MB-T16-SCF -
Lens filter systems and matte boxes
Tilta 95mm Variable ND for Tilta Mirage
The 95mm Variable ND for Tilta Mirage was developed in close collaboration with top tier optical manufacturers, the VND module accommodates multiple configurations, the lightest being only 130g.
Using new PL + CPL technology, the VND module can produce accurate colors even at its maximum density.
The Variable ND can be gradually adjusted, allowing you to keep consistent exposure when lighting conditions change unexpectedly.
The module has built-in hard stops between ND 0.3 ~ ND 2.7 to ensure no risk of an X-Pattern Cross Shadow.
The VND module can be wirelessly controlled by an optional micro motor to remotely adjust the ND level which offers more flexibility while shooting.
SKU: TIL-MB-T16-VND -
Lens filter systems and matte boxes
Tilta Advanced Control Knob for Tilta Mirage
This Advanced Control Knob for Tilta Mirage mounts directly to your Variable ND or Polarizer Filter in order to provide a more comfortable and precise option for adjusting the density of your filters.
The Control Knob attaches directly to these filters via two M3 threads which allows this accessory to be used in multiple situations, even when the filter is mounted directly to the lens via our Lightweight Clamp-On Adapter.
This accessory is the perfect solution for anyone who frequently needs to manually control their Variable ND or Polarizer.
SKU: TIL-MB-T16-ACK -