D-tap to Sony FX6, FX9 allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper 19.5V required by the camera.Cable length: 20 inches (508mm)Specifications:Weight: 90.72 g (0.2 lbs)Dimensions: 571.5 x 34.8 x 19 mm (22.5 x 1.37 x .75 in)
Wooden Camera D-Tap to Sony FX6 / FX9
Converts battery voltage to 19.5v. Purpose built for the Sony FX9. Purpose built for the Sony FX6.
$224.00
Related products
-
Battery adapters and DC couplers
Nanlite BH-FZ60V Battery handle V-Mount
0 out of 5(0)Achieve long runtimes by powering the Forza 60 with a V-mount battery.
The Nanlite BH-FZ60V allows you to run a Forza 60 or Forza 60B from a V-Mount battery. The BH-FZ60V battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B, and a V-Mount buckle to mount the battery.
The Nanlite BH-FZ60V V-mount battery adaptor can be mounted on a light stand, and also includes a handle to enable the Forza 60 to be operated hand-held, ideal for run and gun filmmaking.
The Nanlite Forza 60 V-Mount battery handle is only compatible with 14.8V V-Mount batteries.
Forza 60 runtime from a 100Wh V-Mount battery is approximately 100 minutes.
SKU: NAN-NNBHFZ60V$35.00 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24$289.00 -
Battery adapters and DC couplers
Nanlite BT-BA-SNP/DC Battery adaptor NPF
0 out of 5(0)Attach a pair of NPF batteries to extend the runtime of your Pavotube 15C or 30C.
The Nanlite BT-BA-SNP/DC can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube or Forza. The 15V DC output is designed for the Pavotube 15C, and Pavotube 30C, Forza 60, and Forza 60B.
A pair of NPF970 batteries mounted onto this adaptor will provide 88Wh of capacity. That is nearly as much as a small (98Wh) V-Mount battery.
SKU: NAN-NNBASNPDC$40.00 -
Battery adapters and DC couplers
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage
0 out of 5(0)Dynacore Tiny V-Lock Cage mount.
It can be fixed in any position in the camera cage with 1/4 thread.
It includes Two D-tap outputs for powering of multiple devices.
Weight: 0.1Kg
Size: 112*83*26mm
SKU: DYN-D-MS-CA$76.00 -
Battery adapters and DC couplers
Dynacore D-AS Gold Mount to V-Lock Adaptor
0 out of 5(0)It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.
It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
- Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
- Lock Gold Mount side of D-AS with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 124×97×40mmSKU: DYN-D-AS$100.00